HULALA H O M E ITEM NO.SCTY0594 NOTE: This brochure contains IMPORTANT safty info. Please read and keep for future reference.
MAINTAINANCE AND WARNING 1.Keep furniture away from heat sources. 2.Do not clean furniture with harsh cleaner or polishes.Do not use detergents,solvents,abrasives,spray packs or leather cleaner. Use non-color mild soa with warm water to clean spills(Mix 1:10 soap to water). 3.Do not place furniture under direct sunlight,material will possibly fade over time. 4.Do not use on site dry cleaning machine.Children should not climb or jump on the furniture. 5.
EXPLOSIVE VIEW A1 A4 A6 A10 A3 A10 A5 A10 A10 A9 A2 A8 A7 A7 A7 A7 2PERSONENS 03/21
PARTS LIST 1 A1 x1 A2 x1 A3 x1 A4 x1 A5 x1 A6 x1 A7 x4 A8 x1 A9 x1 A10 x4 04/21
HARDWARE LIST B1 x20 1/4"*3/4" B7 x2 B2 x26 Ø3*15MM B8 x4 B3 x24 B4 x2 x4 x16 B6 x16 1/4"*16MM Ø3*15MM B9 B5 B10 x4 B11 x4 B12 x4 Ø4*20MM Ø4*39MM B13 x2 TOOL LIST B14 x1 B15 x1 1/4" HARDWARE SPARE LIST B1 x2 1/4"*3/4" B2 x2 Ø3*15MM B3 x2 Ø3*15MM B5 x2 B6 x1 1/4"*16MM 05/21
ASSEMBLY INSTRUCTIONS STEP-1 1.Use screw B2 to attach magnetic catch （B4） to the corresponding hole of panel(A1), tighten screw with screwdriver B15.
ASSEMBLY INSTRUCTIONS STEP-2 1.Insert part (A4&A3) into part (A1),make sure all holes aligned and then tighten it with allen key B14 as picture show.
ASSEMBLY INSTRUCTIONS STEP-3 1.Insert part (A5) into part (A1),make sure all holes aligned and then tighten it with allen key B14 as picture show.
ASSEMBLY INSTRUCTIONS STEP-4 1.Insert bottom panel (A2) into the corresponding hole of preassembled step 3 ，make sure all holes aligned and use allen key B14 to tighten it as picture show.
ASSEMBLY INSTRUCTIONS STEP-5 1.Insert gasket B5 into screw B1. install leg A7 on of bottom panel A2, then tighten the screw with an Allen key B14.
ASSEMBLY INSTRUCTIONS STEP-6 1.insert back panel(A6) into the groove of preassembled step 5,make sure all holes aligned and use screw B2 to attach them ，tighten screw B2 with screwdriver B15.
ASSEMBLY INSTRUCTIONS STEP-7 A7 Attention: Before the next step, adjust the feet of the locker to keep it level.
ASSEMBLY INSTRUCTIONS STEP-8 1.Use screw B3 to attach hingeB8 to the corresponding hole of panel(A8&A9), tighten screw with screwdriver B15.
ASSEMBLY INSTRUCTIONS STEP-9 1.Move door (A8&A9) to corresponding position of side panel (A3&A4)，make sure all holes aligned and use screw B3 to attach them,tighten screwB1 with screwdriverB15.
ASSEMBLY INSTRUCTIONS Concealed hinges are three-way adjustable: or Do Sid e pa ne ls r o Do Sid e pa ne ls Horizontal by screw adjustment! Concealed hinges are three-way adjustable: or Sid Do ep an els or Do Sid ep an els In-and-out by loosening the hinge arm mounting screw or via cam adjustment! Concealed hinges are three-way adjustable: or Do Sid ep an els or Do Vertical via slots in the mounting plate or via cam adjustment! Sid ep an els Hinge adjustment method 15/
ASSEMBLY INSTRUCTIONS STEP-10 1.Insert shelf holder B6 into the corresponding hole of panel (A3&A5&A4) and then attach panel (A10) to it.
ASSEMBLY INSTRUCTIONS STEP-11 1.Use bolt B1 to attach handle B7 to the corresponding hole of panel(A8&A9), tighten screw with Allen key B14.
ASSEMBLY INSTRUCTIONS STEP-12 1.Use screw B11 to attach part B9 to preassemble unit at step 11 ,tighten screws with screwdriver B15.
ASSEMBLY INSTRUCTIONS B9 STEP-13 x2 B10 x4 B12 x4 B15 x1 Ø4*39MM 1.Install the anti-collapse device. 2.Mark the position on the wall, that corresponds to the location of part B9 on the of panel (A1); Drill and insert the expandable screw B10 by hammer. 3.Assemble the part B9 to the wall. Align the hole in the part B9 with the expandable screw B10, use screw B12 to attach it and tighten by screwdriverB15. NOT PROVIDED L AL W 1. LL A W 2.
ASSEMBLY INSTRUCTIONS B13 x2 STEP-14 1.Let the plastic belt B13 pass through the both part B9 and pull tightly.
WARRANTY 1.We strive to offer high-quality products,and we also try our best to satisfy each and every customer that orders from us with product or service as needed. 2.We provide 30 days warranty starting from the time you receive the item.Each customer must provide a record of their order such as the order number,or item receipt for any items that are out of the warranty period you may also still receive. 3.Replacement parts by purchasing them with our company if they are available.
