Owner manual

ManualsBrandsJaypro Sports ManualsSports and recreationBLCH-321

REV-A, 4/10

-- 3 ROW, 15 & 21 FT BLEACHER with

GALVANIZED STEEL UNDER CARRIAGE

(STANDARD OUTDOOR)

Installation Instructions

BLCH-3 → 3 Row, 15 Ft Aluminum Seat Bleacher w/ galvanized steel undercarriage.

BLCH-321 → 3 Row, 21 Ft Aluminum Seat Bleacher w/ galvanized steel undercarriage.

Call Jaypro Sports Equipment at 1-800-243-0533

during regular business hours for technical support.

www.jaypro.com

Summary of content (5 pages)

PAGE 1
-- 3 ROW, 15 & 21 FT BLEACHER with GALVANIZED STEEL UNDER CARRIAGE -(STANDARD OUTDOOR) Installation Instructions BLCH-3 → 3 Row, 15 Ft Aluminum Seat Bleacher w/ galvanized steel undercarriage. BLCH-321 → 3 Row, 21 Ft Aluminum Seat Bleacher w/ galvanized steel undercarriage. Call Jaypro Sports Equipment at 1-800-243-0533 during regular business hours for technical support. www.jaypro.
PAGE 2
JAYPRO SPORTS 3 ROW, ALUMINUM BLEACHER WITH GALVANIZED LEG PARTS LIST ITEM 1 2 3 4 5 6 7 8 9 10 11 12 PART # BLCH-3L BLCHX-76 AR5043 AR5052 HB5054 HN5046 AR5044 HS5035 AR5045A HW2047 HN5042 HS288 DESCRIPTION 3-ROW GALVANIZED STEEL BLEACHER LEG BLEACHER X-BRACE, 3rd ROW (BLCH-3X / BLCH-321X) 9-1/2" x 1-1/2" x 15' STADIUM PLANK 9-1/2" x 1-1/2" x 21' STADIUM PLANK 5/16"-18 x 1-1/4" CARRIAGE BOLT, ZP 5/16"-18 FLANGE NUT, ZP 5/16" BOLT CLIP #8 x 1/2" PAN HEAD PHILIP SCREW SELF DRILL, ZP 9-1/2" ALUMINUM SEAT P
PAGE 3
ASSEMBLY INSTRUCTIONS TOOLS REQUIRED: (1) 9/16” Socket Wrench and Box Wrench (1) 3/4” Socket Wrench and Box Wrench (1) Rubber Mallet (1) Phillips head screwdriver • • Unpack all parts and check against parts list to ensure that all have been included. Inspect all parts for damage. Report any damages to the trucking company. Assemble Frame: 1. Assemble undercarriage frame as shown in figure 1 & 2. Vertically plumb and square each leg before tightening cross-bracing hardware.
PAGE 4
FIGURE: 2 (BLCH-321 shown above) Install Seat and Foot Planks: 2. Install end caps on both ends of each plank as shown in figure 3 – lightly tap on with a rubber mallet if necessary. Secure end caps in place using the #8 pan head self-drilling screws.
PAGE 5
3. Making sure the undercarriage frame is square and plumb, install the seat and foot planks. The seat and foot planks are best installed starting from the front seat and working towards the back. Use the hardware and bolt clip as shown in figure 4 & 5. Position planks so they are centered on the frame, with equal amount of overhang on each end. FIGURE: 4 FIGURE: 5 (SINGLE FOOT PLANK) Final Adjustments: • Checks to make sure the bleacher is properly aligned and square.