Manual

ManualsBrandsJaypro Sports ManualsSports and recreationBLDP-221TRG

REV-, 4/10

-- 2 ROW, 21 FT ALUMINUM BLEACHER --

(STANDARD & PREFERRED TIP n’ ROLL)

Installation Instructions

BLCH-221TRG → Standard Aluminum 2 Row, 21 Ft Tip N’ Roll Bleacher.

BLDP-221TRG → Preferred 2 Row, 21 Ft Tip N’ Roll Bleacher, w/ Double Planks.

Call Jaypro Sports Equipment at 1-800-243-0533

during regular business hours for technical support.

www.jaypro.com

Summary of content (6 pages)

PAGE 1
-- 2 ROW, 21 FT ALUMINUM BLEACHER -(STANDARD & PREFERRED TIP n’ ROLL) Installation Instructions BLCH-221TRG → Standard Aluminum 2 Row, 21 Ft Tip N’ Roll Bleacher. BLDP-221TRG → Preferred 2 Row, 21 Ft Tip N’ Roll Bleacher, w/ Double Planks. Call Jaypro Sports Equipment at 1-800-243-0533 during regular business hours for technical support. www.jaypro.
PAGE 2
JAYPRO SPORTS 2 ROW, 21 FT ALUMINUM TIP n’ ROLL BLEACHER PARTS LIST ITEM PART # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 BLAL-2RL BLAL-3RX-1 AR5052 CS0011 RR5005 HN5038 HW2050 HS287 HN5042 HB5054 HN5046 AR5044 HS5035 AR5045A HW2044 HS2884 DESCRIPTION ALUMINUM 2-ROW BLEACHER LEG 1/4" x 1-1/4" FLAT X-BARS (BLAL-321RX) 9-1/2" x 1-1/2" x 21' STADIUM PLANK 1/2"-13 x 1-1/2" THREAD x 4" DIA.
PAGE 3
ASSEMBLY INSTRUCTIONS TOOLS REQUIRED: (1) 9/16” Socket Wrench and Box Wrench (1) 3/4” Socket Wrench and Box Wrench (1) Rubber Mallet (1) Phillips head screwdriver • • Unpack all parts and check against parts list to ensure that all have been included. Inspect all parts for damage. Report any damages to the trucking company. Install Feet and Wheel Casters: 1. Attach three rubber feet (bumpers) on the bottom of each leg as shown in figure 1. 2.
PAGE 4
Assemble Frame: 3. Assemble undercarriage frame as shown in figure 3. Vertically plumb and square each leg before tightening cross-bracing hardware. FIGURE: 3 Install Seat and Foot Planks: 4. Install end caps on both ends of each plank as shown in figure 4 – lightly tap on with a rubber mallet if necessary. Secure end caps in place using the #8 pan head self-drilling screws.
PAGE 5
. Making sure the undercarriage frame is square and plumb, install the seat and foot planks. The seat and foot planks are best installed starting from the front seat and working towards the back. Use the hardware and bolt clip as shown in figure 5. Position planks so they are centered on the frame, with equal amount of overhang on each end. Note that standard bleacher (BLCH-221TRG) have a single foot plank, which is centered on the support frame, see figure 6.
PAGE 6
FIGURE: 7 (DOUBLE FOOT PLANK) Final Adjustments: • • Checks to make sure the bleacher is properly aligned and square. Securely tightened all plank hardware. Tip N’ Roll bleachers: using two people stand the bleacher up on the wheel casters. Adjust the wheel height up/down so all the wheels are in equal contact with the floor. Securely tighten both nuts on each wheel caster.