Getting Started Guide

Getting started
Power on/off and pairing
To power on, place the earpieces in the charging case then take them out of the
charging case, both earpieces at the same time. The LED on bothearpieces will
flash in white. Once the two earpieces have connected to each other, the LED on
the left earpiece will turn off and the LED on the right earpiece will flash in red and
white as the earphones enter pairing mode automatically. To pair, go to Bluetooth
®
settings on your device and select “JAYS m-Seven True Wireless”. The LED on the
right earpiece will turn off upon a successful connection.
To power off, place the earpieces in the charging case and they will turn off
automatically. If the Bluetooth
® on the paired device turns off, the earphones
will turn off automatically after 3-5 minutes.
Reconnecting and additional pairing
The earphones will automatically try to reconnect to the most recently used
device when both earpieces is taken out of the charging case.
Using the charging case
To charge, place both the earpieces in the charging case, the charging will begin
automatically. The charging is indicated by the LED flashing in red on both
earpieces. When the LED turns off, the earphones are fully charged.
The battery level of the charging case is indicated by the four white LEDs on
the front of the charging case. Press the button on the back of the charging case
to check the battery level. One light, 25% battery. Two lights, 50% battery.
Three lights, 75% battery. Four lights 100% battery. Charge the charging case
by connecting the included cable to the bottom of the charging case and any
certified USB power output. A full 100% charge will take around 2.5 hours
(depending on temperature and charger).
Battery status
When the LED on the earpieces flash in red, the battery level is running low.
Troubleshooting
Problem pairing and connecting
• Make sure the earphones are not connected to another device.
• Disable and enable Bluetooth on your device.
• Move the earphones closer to the device or alter their positions
to avoid Bluetooth interference.
• Verify no other wireless equipment interfere with your earphones Bluetooth signal.
Problem with sound transmission
Move the streaming device to another position. Your body, distance, different
materials and other wireless equipment can interfere with the wireless signal
between your device and earphone.
Legal & Warranty
Environmental information
This product complies with international directives, including but
not limited to WEEE Directive (2012/19/EU). Do not dispose with
normal household waste. Please consult your local waste disposal
authority for guidance on how to properly recycle or dispose of
this product.
Manufacturer’s limited warranty
Your original Jays Group AB product is covered by a warranty of twelve (12)
months from the date of purchase of a brand new, unused Jays Group AB
product by the original purchaser. Jays Group AB guarantees that the product
is free from faults in the materials, design and workmanship when it was sold
to the purchaser. If you are not able to submit the receipt when making a
warranty claim you may be obliged to pay for any repairs carried out. Proof
of purchase must clearly state the date of purchase, name of the product and
authorized resellers’ details
The Warranty Period cannot be extended or renewed due to subsequent
resale or replacement of the product. This Limited Warranty does not affect
your legal rights under your applicable national laws relating to the sale of
consumer electronic products. Defective parts replaced within the Limited
Warranty Claim shall become the property of Jays Group AB.
What is not covered by the limited warranty?
• Faults caused by wear and tear, age-related battery capacity loss, accidents,
dropping, mechanical damage, moisture, chemical products, abnormal
impact damage or force majeure.
•
Group AB approval.
How to get warranty service
If you wish to make a Warranty Claim within the Limited Warranty Period,
please contact the reseller of your product for further help. You will need
to provide the proof of purchase and the affected part. Any defective parts
covered by the Limited Warranty will be repaired or replaced free of charge.
Replaced or repaired parts provided during the Warranty Period will be
warranted for the remainder of the original Warranty Period or for sixty (60)
days from the date of repair or replacement, whichever is longer. For FAQ
please visit www.jaysheadphones.com.
EN English
Resetting the earphones
To reset the earphones, place both earpieces in the charging case. Then quickly
place a finger on both left and right earpiece and keep them there until the LED
on both earpieces flashes twice in purple as the earphones reset. The earphones
will now enter interconnection mode and try pairing to each other.
FAQ and quickstart guide
Visit jaysheadphones.com for more instructions and help on this product.
• If the earpieces does not pair with eachother, reset the earphones. Follow instructions above.