User manual

EN/1501.V01 WHDV-5008
EN
7
PREPARATION
INSTALLING THE BATTERY
1. Push the battery cover lock to the right to open the battery cover.
2. Insert the battery into the battery compartment. Please have the metal contacts aligned with the metal contacts in the
compartment.
3. After the battery is properly installed, close the battery cover until the click sound is heard (if no click sound is heard, it
shall mean that the cover has not been properly closed).
CHARGING THE BATTERY
1. Make sure the video camera is being switched off.
2. Connect the video camera with the computer via the USB cable.
3. The Charging LED will light in blue color white charging and will go off when the charging is done.
NOTE
It is normal that the temperature of the video camera body rises during charging.
INSERTING/REMOVING THE MEMORY CARD
The camera accepts SD/SDHC card from 2GB to 32 GB. It is suggested to use the
memory cards with capacity more than 4GB and the speeds faster than Class 4 to
have the best performance for the 1080p video recording.
1. Make sure the video camera is being switched off.
2. Push the battery cover lock to the right to open the battery cover.
3. Insert the memory card in the video camera as illustrated.
4. Place back the battery cover.