SDS

ManualsBrandsJB WELD ManualsEpoxy & Accessories10 oz. Pro Blister Epoxy (Case of 6)

Safety Data Sheet

According to OSHA Hazard Communication Standard, 29 CFR 1910.1200

Initial preparation date: 06.15.2018 Page 1 of 11

Steel Reinforced Epoxy Resin - Twin Tube - Part A

SECTION 1: Identiﬁcation

Product identiﬁer

Product name: Steel Reinforced Epoxy Resin - Twin Tube - Part A

Product code: 8265, 8265S, 8265H, 80165, 8280, 8281, 8272, 8276,

80176, 8270, 8271, 8276H

Recommended use of the product and restriction on use

Relevant identiﬁed uses: Adhesive Part A

Uses advised against: Not determined or not applicable.

Reasons why uses advised against: Not determined or not applicable.

Manufacturer or supplier details

Manufacturer:

United States

J-B Weld Company, LLC

400 CMH Road

Sulphur Springs, TX 75482

903-885-7696

info@jbweld.com

Emergency telephone number:

United States

CHEMTREC

Transportation Emergencies (24 hour): 800-424-9300 or

703-527-3887

Poison Control Centers (24 hour): medical emergencies 800-222-1222

SECTION 2: Hazard(s) identiﬁcation

GHS classiﬁcation:

Eye irritation, category 2A

Skin irritation, category 2

Skin sensitization, category 1

Label elements

Hazard pictograms:

Signal word: Warning

Hazard statements:

H319 Causes serious eye irritation.

H315 Causes skin irritation.

H317 May cause an allergic skin reaction.

Precautionary statements:

P264 Wash skin thoroughly after handling.

P280 Wear protective gloves/protective clothing/eye protection/face protection.

P261 Avoid breathing dust/fume/gas/mist/vapors/spray.

P272 Contaminated work clothing should not be allowed out of the workplace.

P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if

present and easy to do. Continue rinsing.

Summary of content (24 pages)

PAGE 1
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 06.15.
PAGE 2
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 06.15.2018 Page 2 of 11 Steel Reinforced Epoxy Resin - Twin Tube - Part A P337+P313 If eye irritation persists get medical advice/attention P321 Speciﬁc treatment (see supplemental ﬁrst aid instructions on this label). P362 Take oﬀ contaminated clothing and wash before reuse P302+P352 IF ON SKIN: Wash with plenty of soap and water.
PAGE 3
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 06.15.
PAGE 4
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 06.15.2018 Page 4 of 11 Steel Reinforced Epoxy Resin - Twin Tube - Part A Reference to other sections: Not determined or not applicable. SECTION 7: Handling and storage Precautions for safe handling: Use only with adequate ventilation. Avoid breathing dust. Do not eat, drink, smoke or use personal products when handling chemical substances.
PAGE 5
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 06.15.2018 Page 5 of 11 Steel Reinforced Epoxy Resin - Twin Tube - Part A Personal protection equipment Eye and face protection: Safety goggles or glasses, or appropriate eye protection. Skin and body protection: Select glove material impermeable and resistant to the substance. Wear appropriate clothing to prevent any possibility of skin contact.
PAGE 6
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 06.15.2018 Steel Reinforced Epoxy Resin - Twin Tube - Part A VOC Content <1% SECTION 10: Stability and reactivity Reactivity: Does not react under normal conditions of use and storage. Chemical stability: Stable under normal conditions of use and storage. Possibility of hazardous reactions: None under normal conditions of use and storage. Conditions to avoid: None known.
PAGE 7
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 06.15.2018 Steel Reinforced Epoxy Resin - Twin Tube - Part A Name Result Phenol, 4,4'-(1Causes serious eye irritation. methylethylidene)bis-, polymer with 2-(chloromethyl)oxiran 1,4-bis(2,3 epoxypropoxy)butane Causes serious eye irritation. Respiratory or skin sensitization Assessment: May cause an allergic skin reaction Product data: No data available.
PAGE 8
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 06.15.2018 Steel Reinforced Epoxy Resin - Twin Tube - Part A Product data: No data available. Substance data: No data available. Speciﬁc target organ toxicity (repeated exposure) Assessment: Based on available data, the classiﬁcation criteria are not met. Product data: No data available. Substance data: No data available.
PAGE 9
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 06.15.
PAGE 10
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 06.15.2018 Page 10 of 11 Steel Reinforced Epoxy Resin - Twin Tube - Part A Signiﬁcant New Use Rule (TSCA Section 5): Not determined. Export notiﬁcation under TSCA Section 12(b): Not determined. SARA Section 302 extremely hazardous substances: Not determined.
PAGE 11
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 06.15.
PAGE 12
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 06.15.
PAGE 13
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 06.15.2018 Page 2 of 13 Steel Reinforced Epoxy Hardener - Slow Cure - Twin Tube - Part B P272 Contaminated work clothing should not be allowed out of the workplace. P270 Do not eat, drink or smoke when using this product. P310 Immediately call a POISON CENTER or doctor/physician. P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes.
PAGE 14
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 06.15.2018 Page 3 of 13 Steel Reinforced Epoxy Hardener - Slow Cure - Twin Tube - Part B presented. SECTION 4: First aid measures Description of ﬁrst aid measures General notes: Not determined or not applicable.
PAGE 15
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 06.15.2018 Page 4 of 13 Steel Reinforced Epoxy Hardener - Slow Cure - Twin Tube - Part B Not determined or not applicable. Notes for the doctor: Not determined or not applicable.
PAGE 16
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 06.15.2018 Page 5 of 13 Steel Reinforced Epoxy Hardener - Slow Cure - Twin Tube - Part B Country (Legal Basis) Substance Identiﬁer Permissible concentration WEEL Diluent 100-51-6 WEEL TWA 10.0 ppm Amine 112-57-2 TWA 8-hr: 6.0 mg/m³; 1.0 ppm Amine 112-24-3 WEEL TWA 1.
PAGE 17
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 06.15.2018 Page 6 of 13 Steel Reinforced Epoxy Hardener - Slow Cure - Twin Tube - Part B (where applicable) or to an acceptable level (in countries where exposure limits have not been established), an approved respirator must be worn. General hygienic measures: Avoid contact with skin, eyes and clothing. Wash hands before breaks and at the end of work. Wash contaminated clothing before reuse.
PAGE 18
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 06.15.2018 Steel Reinforced Epoxy Hardener - Slow Cure - Twin Tube - Part B None known. Incompatible materials: None known. Hazardous decomposition products: None known. SECTION 11: Toxicological information Acute toxicity Assessment: Based on available data, the classiﬁcation criteria are not met. Product data: No data available.
PAGE 19
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 06.15.2018 Page 8 of 13 Steel Reinforced Epoxy Hardener - Slow Cure - Twin Tube - Part B Name Result Amine May cause an allergic skin reaction. May cause an allergic skin reaction. May cause an allergic skin reaction. Carcinogenicity Assessment: Based on available data, the classiﬁcation criteria are not met. Product data: No data available.
PAGE 20
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 06.15.2018 Page 9 of 13 Steel Reinforced Epoxy Hardener - Slow Cure - Twin Tube - Part B Name Result Curing Agent May cause damage to kidneys through prolonged or repeated oral exposure. Aspiration toxicity Assessment: Based on available data, the classiﬁcation criteria are not met. Product data: No data available. Substance data: No data available.
PAGE 21
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 06.15.2018 Page 10 of 13 Steel Reinforced Epoxy Hardener - Slow Cure - Twin Tube - Part B United States Transportation of dangerous goods (49 CFR DOT) UN number UN 1760 UN proper shipping name Corrosive Liquids, N.O.S.
PAGE 22
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 06.15.2018 Page 11 of 13 Steel Reinforced Epoxy Hardener - Slow Cure - Twin Tube - Part B 112-24-3 Amine Listed 65997-17-3 Fiberglass Powder Listed 14807-96-6 Talc Powder Listed 13463-67-7 Titanium Dioxide Listed 7727-43-7 Barium Sulphate Listed Signiﬁcant New Use Rule (TSCA Section 5): Not determined. Export notiﬁcation under TSCA Section 12(b): Not determined.
PAGE 23
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 06.15.
PAGE 24
Safety Data Sheet According to OSHA Hazard Communication Standard, 29 CFR 1910.1200 Initial preparation date: 06.15.2018 Page 13 of 13 Steel Reinforced Epoxy Hardener - Slow Cure - Twin Tube - Part B Abbreviations and Acronyms: None Disclaimer: This product has been classiﬁed in accordance with OSHA HCS 2012 guidelines. The information provided in this SDS is correct, to the best of our knowledge, based on information available.