Manual

ManualsBrandsJBA ManualsCar1811SJT

Installation Instructions

and Warranty Information

Part# 1811S 2008-2009 Pontiac G8 6.0L V8

Read all instructions carefully before attempting installation.

Corporate Ofce: PerTronix Inc. 440 E. Arrow Highway, San Dimas, California 91773 * Phone 909.599.5955 • FAX 909.599.6424



CARB EO # D-57-25

Rev. 2 2-28-13 DSL

Summary of content (5 pages)

PAGE 1
Corporate Office: PerTronix Inc. 440 E. Arrow Highway, San Dimas, California 91773 * Phone 909.599.5955 • FAX 909.599.6424 Installation Instructions and Warranty Information Part# 1811S 2008-2009 Pontiac G8 6.0L V8 CARB EO # D-57-25 Read all instructions carefully before attempting installation. Rev.
PAGE 2
PerTronix© thanks you for choosing JBA HEADERS, the best fitting, highest quality header on the market. In order to realize the full potential of our good fit, please read and understand these instructions completely prior to starting work. Check to make sure you received the proper parts for your application. The header number will be stamped on the engine flange. If you are unsure you have received the proper parts call before you start work.
PAGE 3
1. Place vehicle in a location where the floor is solid and flat, with adequate lighting. Do not attempt to work on a hot engine. Heat causes metal to expand and makes removal of fasteners difficult at best. Disconnect the battery cables from the battery. Raise the front of the vehicle to obtain adequate access to the bottom exhaust manifold flanges. Use large-base jack stands to support the vehicle. Do not rely on the jack! Block the tires to prevent the vehicle from rolling off the jack stands. 2.
PAGE 4
Parts List: (1) Driver ’s Side Header Assembly (1) Passenger ’s Side Header Assembly (2) Head flange gaskets (12) 8mm-1.25 x 25mm Header fasteners w/lock washers (Torque to 13 ft/lbs) (4) 3/8 -16 x 2” Collector bolts w/nuts and washers (Torque to 35 ft.
PAGE 5