www.jbctools.com INSTRUCTION MANUAL Compact Micro Tweezers Station Ref.
Packing List The following items are included: CP Control Unit ......................................... 1 unit Ref. CP-1F (120V) CP-2F (230V) CP-9F (100V) Adjustable Micro Tweezers ................... 1 unit Ref. AM120-A Power Cord ........................................... 1 unit Ref. 0023715 (120V) 0023714 (230V) 0024092 (100V) Brass Wool .................................................... 1 unit Ref. CL6210 Sponge .................................................. 1 unit Ref. S0354 Manual ......
w w w.jbctools.com Features and Connections Cable Collector Adjustable Stand: Intelligent Heat Management Cartridge Storage Quick Tip Changer Process Screen Tip Cleaner Brass Wool with Antisplash Membrane and Wiper Adjustable Micro Tweezers Ref.
CA Adjustable Stand Cable Collector (Ref. CC1001) Adjust the tool stand to suit your work position. Place the cable on the collector so that the working area is free of cable. CD-S CP CD-B CS CDE-S CDE-B Tip Cleaner Select the option to suit your needs and improve the thermal transfer of the tip. Splashguard Ref. 0017576 Antisplash Membrane Ref. 0017574 When using the brass wool. it prevents splashing of solder particles. Prevents splashing and keeps the work area clean. Brass Wool Ref.
w w w.jbctools.com Removing the Splashguard 1. Unlock the splashguard. OK 2. Lift off. OK Lock More cleaning options (not supplied): Inox Wool Ref. CL6205 Stronger cleaning method than brass wool. Metal Brush Ref. CL6220 When used carefully, it provides a more thorough cleaning. Wiper Sponge Ref. CL0160 Ref. S0354 Tapping: Tap gently to remove excess solder. Wiping: Use the slots to remove remaining particles. The softest cleaning method.
Changing Cartridges 1. Removing 2. Positioning Place the cartridges in the extractor and pull to remove the cartride. Place the tweezers on top of the new cartridge and press down slightly. 3. Inserting Use the holes for fixing the cartridges*. *Important It is essential to insert the cartridges as far as the mark for a proper connection.
w w w.jbctools.com OK Slightly turn the wheels to align the cartridges as required. Close the tweezers and the rearAUX wheel allows the cartridges to be equally aligned en vertical direction. TOOL EARTHING FUSE 5. Vertical Cartridge Alignment USE ONLY WITH A 250 V FUSE 4. Rotational Cartridge Alignment Compatible Cartridges TOOL AU The CP stations work with C120 cartridges and AM120 Ajustable Micro Tweezers. TOOL Find the model that best suits your soldering needs in www.jbctools.
Operation The JBC Exclusive Heating System This revolutionary technology is able to recover tip temperature extremely quickly. This allows the user to work at a lower temperature. As a result, tip life increases by 5. 2. Sleep 1. Work 3. Hibernation Long time in the stand When the tool is lifted from the stand the tip will heat up to the selected temperature.
w w w.jbctools.com Control Process Work Screen Fixed temp. 3 5 0 o C The work screen provides useful information of tool status in real time. Earth Fuse warning is shown when fuse is blown. Replace the fuse. Levels ºC 2 7 0 3 5 0 4 0 0 350 0 c Displays a specific fixed temp. Shown when you have selected temp. levels. The values must be adjusted for the task. Selected temp. 3 5 0 o C EARTH FUSE -10 Power 5% “Temp. Adjust” parameter.
Parameters Be careful when using these parameters as they may reduce the tip life if not used properly. Please follow the recommended guidelines: Station Settings Parameter Description Recommendations Temperature Unit Celsius (ºC) or Fahrenheit (ºF) N/a Maximum Temperature Set the maximum temperature to work with. Max. temp by default is 400°C (750°F). This is considered high enough to work with most lead-free applications. Minimum Temperature Set the minimum temperature to work with. Min. temp.
w w w.jbctools.com Tool Settings Parameter Description Recommendations Warnings Fix One Temperature Fix a value within the temperature range of the station (90-450ºC/190-840ºF). Ideal for soldering more than one component at a specific temperature. The station will reject any attempt to change the temperature. N/a Temperature Levels Set Similar to “Fix one temp” parameter. In this case, the user can set up to 3 values for different power requirements.
Tool Settings Parameter Description Recommendations Hibernation Delay Set the time the tool will remain at Sleep temperature before entering the Hibernation mode. At this time, the power supply is cut off and the tip remains at room temperature. This function completely protects the tip from oxidation during long periods of inactivity while the tool is in the stand. Retinning the tip before placing the tool in the stand also helps prevent oxidation and extends the life of the tip.
w w w.jbctools.com USB Connector Download the latest software from our website to update your soldering station. JBC Updater www.jbctools.com/software.html Update the station software via USB connection: Cable USB AB JBC Updater JBC Web Manager www.jbctools.com/manager.html Manage and monitor as many stations as your PC can handle by using the JBC Web Manager. You can export data to another PC.
Maintenance Before carrying out maintenance, always switch the device off and disconnect it from the mains. Allow the equipment to cool down. Clean Clean periodically periodically - Clean the station screen with a glass cleaner or a damp cloth. - Use a damp cloth to clean the casing and the tool. Alcohol can only be used to clean the metal parts. - Periodically check that the metal parts of the tool and stand are clean so that the station can detect the tool status.
w w w.jbctools.com Safety It is imperative to follow safety guidelines to prevent electric shock, injury, fire or explosion. - Do not use the units for any purpose other than soldering or rework. Incorrect use may cause fire. - The power cord must be plugged into approved bases. Be sure that it is properly grounded before use. When unplugging it, hold the plug, not the wire. - Do not work on electrically live parts.
Notes 16
w w w.jbctools.
Notes 18
w w w.jbctools.com Specifications CP-1QF 120V 50/60Hz. Input fuse: 2A. Output: 23,5V. Control Unit model: CP-1F CP-2QF 230V 50/60Hz. Input fuse: 1A. Output: 23,5V. Control Unit model: CP-2F CP-9QF 100V 50/60Hz. Input fuse: 2A. Output: 23,5V. Control Unit model: CP-9F - Output Peak Power CP-F: - Temperature Range: - Idle Temp. Stability (still air): - Temp. Accuracy: - Temp. Adjustment: - Tip to Ground Voltage/Resistance: - Earthing Fuse: - Connections: - Ambient Operating Temp.
Warranty JBC’s 2 year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labour. Warranty does not cover product wear or misuse. In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased. Get 1 extra year JBC warranty by registering here: https://www.jbctools.com/productregistration/ within 30 days of purchase. www.jbctools.
