Owner's Manual

Crown Field Support Engineering
Issue Date: 6-MAY-2014
Ref. No: STB CSMA #0001
Subject: Selecting Input Routing
.
Applicability: The following instructions will explain how to route inputs on the CSMA mixer amplifier
to both output channels on the two channel version mixer amps.
Note: Default out of the box, inputs 1 through 4 are routed to AMP 1 output and inputs 5 through
8 are routed to AMP 2 output.
Step 1: Plug your audio source into the desired input channel. (For purposes of this note we will refer to
input#1)
Step 2: Input #1 is automatically routed to AMP 1 output. Select the appropriate dipswitch to route
Input #1 to AMP 2 output . This would be dip switch #1 as labeled on the back panel.