Owner's Manual

II .
PROFESSIONAL
bv HARMAN
Professional Series
Key Features:
► Highly weather-resistant IP56 rating
► Consistent 120° x 1 20° broadband pattern control
► Components:
• 200 mm (8 in) woofer with Kevlar-reinforced
cone and 50 mm (2 in) voice coil.
• 25 mm (1 in) ex it compression driver with
unique patented design and high temperature
polymer diaphragm.
► Extraordinary clarity for speech, with extended
frequency response for music.
► Advanced high-slope crossover network for
constant coverage and smooth, natural midrange.
► 250 Watt power handling (average continuous pink
noise) with high sensitivity provides high SPL
capability.
► High-power passive crossover network.
► Overload protection
► 80 Hz - 20 kHz frequency response.
► 200 Watt 70 V / lOOV multi-tap (built-in transformer)
or direct 80 low-impeda nce.
Applications:
The AWCB2 is a compact, coaxial-driver, 2-way,
highly weather-resistant full-range loudspeaker
system which is ideal for speech and music-fill in
a wide variety of applications, including spo1ts
facilities, racetracks, stadiums, fairgrounds, rodeos,
skating rinks, themed entertai nm ent venues, cniise
ships, water parks, outdoor background
music/ paging systems, swin1ming pools, and a
wide variety of other outdoor or indoor venue
types.
The AWC82 is comprised of a high-power co-
axial 200 mm (8 in) low frequency driver and
25 mm (1 in) high frequency compression driver.
The co-axial design utilizes a unique tapered
pole-piece design and transitions to the cone of
the low fr equency driver as a large diameter
pattern control horn for the high frequencies,
both eliminating high-frequency beaming which is
common among this catego,y of speaker and
extending pattern control to the lowest possible
frequencies. The result is a coaxial speaker with
wide, extremely consistent 120° coverage on a
broadband basis.
Component features include a Kevlar-reinforced
l ow frequency cone for reliability, well-damped
surround for smooth frequency response, high
temperature voice coil and a reduced distortion
design through saturated-gap magnet geometry.
The high frequency compression driver features a
unique patented design, high temperature
polymer diaphragm, and fluid-cooling for high
output levels with l ow distortion ..
The paintable enclosure is constructed of thick,
ABS plus fiberglass and is heavily braced to
maximize low-frequency performance. The
corrosion-resistant zinc-rich extra-thick powder
coated steel grille is backed with open ce ll foam
and high thread-count mesh, providing exce ll ent
protection in the harshest environments. The
system is rated IP -56, per IE C529 wh en installed at
minimum 5° down-tilt.
The system is equipped with a 200W 70V / 1 00V
multi-tap transformer. Connection is made via
outdoor-rated terminals in a recessed terminal
cup. A protective terminal compartment cover is
included, al ong with gland nut, which forms a
water-tight seal with round-jacketed cable having
outside diameter between 4 mm (0. 16 in) and
9 mm (0.36 in).
A heavy-duty weather-c apab le z in c- ri ch, thick
powder coated U-type mounting bracket is
included.
AWCB2
All-Weather Compact
2-Way Coaxial
Loudspeaker with 8
11
LF
Specifications:
S stem:
Fr equency Range (- 10 dl3) ': 80 ll z - 20 kHz
Frequency Re spo nse (±3 dl3)': 100 ll z - 20 kHz
Coverage Partern J: 120 ° x 120 °
Dire ct ivity Factor: 8. 1 (I k - 16 kHz)
Directivity Index (DI): 8.4 dl3 (1 k - 16 kHz)
Long-Term Sys1em Power Rating (IEC) ': 250 \YI 2 hrs.
200 \YI 100 hrs
Sensitivity (2.83V @ Im): 94 dB (Ave. 100 Hz - 20 kHz)
Maximum SPL': Direct 80: 118 dB (peaks or 12 4 dB)
200\Y/Ta>: 11 7dB
Crossover Network: 1.8 kHz, 3 rd order (18 dB 'oct) high-pass plus conjugate 10 HF , 2nd
order low- a&, to LF
Nominal Impedan ce: 8 ohms
Transformer Taps: 70V: 200\Y/, 100\Y/, 50\Y/, 25\Y/
IOOV : 200\Y/, 100\Y/ , 50W
Transducers:
Ph sical:
' Full-space (free-field)
1
Average 1 kHz to 10 kHz
Low frequency Driver:
High Frequency Driver:
HF Driver Protection:
Kevlar-reinforced cone with weather treatment, 50 mm (2 in) voice
coil.
25 mm (1 in ) diap h rdgm and voice co il diameter, high temperarure
po lymer diaphragm, patented design, nuid -coo ling .
Minimum audibility SonicGuard™ HF overload protection
Enclosure: ABS w ith Gl ass enclosure
Attachment: Two MIO (fi ne-thread) points for included U-bracket. M6 secondary
sa[ety attachment point on back panel.
Grille: Corrosion-resistant zinc-rich extra-thick powder coa t ed steel grille,
3-layer assembly with foam and woven poly mesh backing.
In put Connection: CE-compliant covered barrier strip terminals. Barrier terminals accept
up to 9 mm outside 4 mm inside open-lug (•6, •8 or # I 0) plus bare
wire up to 2.5 mm' (12 A\Y/G) wire or spade lu gs. Terminal
co mpartment cove r equipped with gl and nut that forms water.tight
seal with round-jacketed cables with ou ts id e di ameters between
4.0 mm (0. 16") and 9.0 mm (0.36")
Environmenta l: rPS6 per IEC;29, wilh a minimum 5° downward a iming angle.
Exceeds Mi l Spec 810 for humidity, salt spray, temperaru re & UV, and
ASTM G85 for salt spray (168 hrs).
Dimensions: 300 x 300 x305 111111 (1 1. 8 x 11.8 x 12.0), cabinet
331 mm (13.0 in) including gland n· u1
359 nun (14.2 in) including bracket extending 10 back
Color s: Available in gray (s imil ar to Pancone 420C) and black (-13 K)
Net Weight 9 8 kg (21.5 lb), 11.6 kg (25.5 lb) with U-bracket
Sh ipping Weight: 1 4.1 kg (31.0 lb)
Included Accessories: U-bracket, matches loudspeaker color (gray or black), zinc-rich extra-
thick powder coated, steel.
1
! EC standard, full bandwidlh pink noise with 6 dB crest factor.
' Calculated hased on power rating and measured full•space sensitivity.
JBL continu:1\ly eng:1ges in r esea rch rel:lted to product improvement. Changes intr oduced into ex isting products without notice
are an expression of that philosophy.