Owner's Manual

Control 14C/T
Two-Way 4" Coaxial
Ceiling Loudspeaker
Professional Series
Key Features:
Components:
100 mm (4.0 in) high output driver with
polypropylene cone and butyl rubber
surround
19 mm (0.75 in) soft-dome liquid-cooled
tweeter
Blind-mount backcan for quick and easy
install
Dual conduit/cable clamps
Combined 70V/100V and low impedance
direct operation
30 Watts at 81 nominal setting
25W multi-tap at 70V/100V
74 Hz – 20 kHz bandwidth with wide 120°
coverage
White or black (-BK)
Applications:
Control 14C/T is a full-range ceiling speaker
consisting of a 100 mm (4 inch) high tech cone
driver and a 19 mm soft-dome liquid cooled
tweeter mounted in a vented, paintable baffle
made of UV resistant UL94-V0 and UL94-5HB
material, with a pre-attached blind-mount
backcan for quick and easy installation. The
speaker is designed to provide excellent sound
quality for a wide variety of medium volume
applications such as music cafes, business
music systems, retail stores, music/paging
systems, airports, reception/waiting rooms,
lounges, courtrooms, convention centers, hotels,
educational facilities, and more.
The 120° coverage delivers consistent sound
quality for listeners located both off and on axis.
The high technology 100 mm (4.0 in) low-
frequency driver is designed with a lightweight,
high temperature anodized aluminum voice
coil former and high temperature grade voice
coil for stable performance and reliability under
long-term high power working conditions.
The butyl rubber surround provides long-
term durability and excellent sonic damping
while the polypropylene cone is water and
humidity resistant. The FEA-optimized motor
construction and cone geometry, along with
linear suspension spider design, allows for a
smooth frequency response and more consistent
off-axis performance. The 19 mm (3/4 in) high
frequency driver features a highly damped
treated silk dome for clear and warm sound, a
lightweight Kapton™ voice coil for better high
frequency response and excellent reliability, low
viscosity liquid cooling for power handling and
reliability, and a wide dispersion waveguide
design to produce wide coverage and smooth
frequency response.
The removable locking connector has screw
terminals for secure wire termination and “loop
through” terminals. A dual strain relief assembly
provides clamping for use with cable or flex
conduit.
Ideal for a wide variety of projects, the
Control 14C/T is switchable for use as either
an 8 ohm low-impedance speaker or as part
of a 70V or 100V distributed loudspeaker
system with a 25 Watt multi-tap transformer.
The speaker comes complete with two tile rail
supports, one C-ring support backing plate,
cutout template, paint shield and grille. A safety
seismic attachment ring is provided on the top
surface. Available in white or black (-BK).
Preliminary Specifications:
System: Frequency Range (-10 dB)
1
: 74 Hz – 20 kHz
Frequency Response (±3 dB)
1
: 100 Hz – 20 kHz
Power Capacity (at low-Z)
2
: 60 Watts Continuous Program Power
30 Watts Continuous Pink Noise
Nominal Sensitivity
3
: 87 dB
Nominal Coverage Angle
3
: 120° conical coverage
Directivity Factor (Q)
3
: 7.6
Directivity Index (DI)
3
: 8.1 dB
Rated Maximum SPL: 102 dB @ 1 m (3.3 ft) average, 108 dB peak
Nominal Impedance: 8 ohms (in direct/bypass 81 setting)
Transformer Taps: 25 W, 12.5 W, 6.3 W @ 70V or 100V
(plus 3.2 W @ 70V only)
Crossover Network: 12 dB/oct (2nd order) low-pass to LF driver, 12 dB/oct
(2nd order) high-pass to HF driver
Transducers: LF Driver: 100 mm (4.0 inch) with polypropylene cone, butyl rubber
surround, anodized aluminum voice coil former, high temperature
voice coil
HF Driver: 19 mm (3/4 in), highly-damped treated-silk dome, Kapton™ voice
coil, liquid cooling, wide dispersion waveguide
Enclosure: Input Connector: Removable locking 4-pin connector with screw-down terminals.
Max wire size 12 AWG (2.5 mm
2
)
Connector Wiring: Pin 1 = + In; Pin 2 = - In; Pin 3 = + Loop Thru;
Pin 4 = - Loop Thru
Strain Reliefs: Strain relief for two cables or two flex conduits via coupled
clamping mechanism
Materials: ABS baffle with UL94-V0 and UL94-5VB flame class fire rating.
Zinc-plated steel backcan
Safety Agency: UL1480, UL2043, NFPA90 & NFPA70; S7232/UL Listed, Suitable
for use in air handling spaces, Signaling Speaker; Transformer UL
registered per UL1876; ROHS, C-tick N108, CE compliant; Baffle
meets UL94-V0 and UL94-5VB flammability rating; In accordance
with IEC60849/EN60849 systems
Dimensions: 196 mm diameter x 181 mm depth from back of baffle
(7.7 in diameter x 7.1 in depth)
Ceiling Cutout Size: Circular cutout with 170 mm (6.7 in) diameter
(cardboard cutout template included)
Ceiling Thickness Range: Up to 35 mm (1.4 in) with stock dog-ears. MTC-TCD thick-ceiling
dog-ears available for up to 55 mm (2.2 in) ceiling thicknesses
Safety Seismic Attachment: One point, top surface
Net Weight: 2.2 kg (4.8 lbs, one speaker)
Shipping Weight: 8.2 kg (17.9 lbs, pair in master carton)
Included Accessories: C-ring support backing plate, 2 tile support rails (for 2 ft or
600 mm tile spans; optional MTC-48TR extension available for
larger 4 ft or 1200 mm tile spans), cutout template, paint shield,
removable locking multi-pin connector, grille
Optional Accessories: MTC-24NC new construction bracket
MTC-24MR mud-ring construction bracket
MTC-TCD thick-ceiling dog-ears for ceiling thicknesses up to
55 mm (2.2 in, ordering one set = 24 dogears for 8 speakers)
MTC-48TR tile rail for 1200 mm (4 ft) tile spans
MTC-14WG (& 14WG-BK) high humidity grille
1
Half-space (flush mounted in ceiling)
2
Continuous Pink Noise Rating is IEC-shaped pink noise with a 6 dB crest factor for 100 hours continuously. Continuous
Program Power is a conservative expression of the system’s ability to handle normal speech and music program material, and is
defined as 3 dB above the Continuous Pink Noise Rating.
3
Half-space (in ceiling) average 1 kHz to 16 kHz.
JBL continually engages in research related to product improvement. Changes introduced into existing products without notice
are an expression of that philosophy.
Included grille not shown.