ALL-IN-ONE LINEAR-ARRAY PA SYSTEM USER’S GUIDE For: Français, Deutsch, Español, visit www.jblpro.
Contents Section 1: Important Safety Instructions ���������������������������������������������������������� 1 Care & Cleaning ��������������������������������������������������������������������������������������������������������������������������������������������������2 Section 2: Precautions ���������������������������������������������������������������������������������������� 3 Section 3: EON ONE PA System Declaration of Conformity ��������������������������� 4 Section 4: Introduction to the EON ON
Section 1: Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
CARE & CLEANING EON ONE systems may be cleaned with a dry cloth. Do not get moisture into any of the openings in the system. Ensure that the system is unplugged from the AC outlet before cleaning. THIS APPARATUS CONTAINS POTENTIALLY LETHAL VOLTAGES. TO PREVENT ELECTRIC SHOCK OR HAZARD, DO NOT REMOVE CHASSIS, MIXER MODULE, OR AC INPUT COVERS. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Section 2: Precautions ! The EON ONE PA system covered by this manual is not intended for use in high moisture environments. Moisture can damage the speaker cone and surround and cause corrosion of electrical contacts and metal parts. Avoid exposing the speakers to direct moisture. Keep speakers out of extended or intense direct sunlight. The driver suspension will prematurely dry out and finished surfaces may be degraded by longterm exposure to intense ultra-violet (UV) light.
Section 3: EON ONE PA System Declaration of Conformity This equipment complies with the EMC directive 89/336/EEC Modified by 92/31/EEC 93/68/EEC 98/13/EEC and LVD 73/23/EEC modified by 93/68/EEC This product meets safety standards: EN60065:2002 UL6500 7th Edition: 2003 UL 60065 - STANDARD FOR AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY EQUIREMENTS - Edition 7 - Revision Date 2007/12/11 CSA C22.
Section 4: Introduction to the EON ONE PA System Thank you for choosing the JBL EON ONE PA system. The EON ONE is an all-in-one linear-array PA system featuring multiple input channels with individual tone controls, reverb, and Bluetooth audio streaming, allowing the user to integrate the system into any number of audio spaces and still look amazing.
4. Connect the female end of the power cable to the mixer and plug the male end into the wall socket or extension cord. Turn the “MASTER VOLUME” control all the way to the left. Now turn the power switch to the “on” position — the “POWER” LED indicator should now be illuminated. At this point you are ready to make audio connections, adjust the channel and master volumes, then listen to the signals amplified by the system.
GETTING ACQUAINTED WITH THE EON ONE POWERED MIXER This part of the EON ONE system houses the mixing board and power amplifier. Here you will connect all of the microphones, musical instruments, and external sound sources (like MP3 players, CD players, or Bluetooth audio sources). The MONITOR OUTPUTS provide a “Front of House” feed and can be connected to recording devices or additional speakers (like a personal monitor or another PA system). THE BASICS The mixing board is actually a very simple device.
MONO MIC/LINE INPUTS Moving from left to right there are 2 identical input strips comprised of (from top to bottom) a treble control, bass control, reverb control, reverb on/off button, volume control, mic/line selector and a XLR 1/4" combination connector.
STEREO INPUTS The EON ONE has two stereo inputs and these are used primarily for MP3 or CD players but could be used with the stereo output of an electronic keyboard, instrument pre-amp or processor, or an electronic drum machine. The inputs labeled “CH 3/4” offer the option of using ¼" phone plugs or RCA plugs and this channel has a volume control. The input labeled “CH 5/6” is a 3.5 mm stereo input of the type typically found on personal music players.
Section 5: System Specifications EON ONE System Amplifier Mixer System Type: Portable Line Array with powered mixer Maximum SPL Output: 118 dB peak system output (pink noise) Frequency Range (-10dB): 37.5Hz – 18.
Section 6: Cables & Connectors XLR/F to XLR/M microphone cable The standard cable for interconnection of microphone and linelevel signals in professional audio systems. Example: Microphone to mixer. TRS (balanced) 1/4" phone to XLR/M cable For connecting balanced devices with 1/4" phone; may be used interchangeably. TRS (unbalanced) 1/4" phone to XLR/M cable For connecting instruments with unbalanced outputs to balanced XLR inputs.
Section 7: Contact Information Mailing Address: JBL Professional 8500 Balboa Blvd. Northridge, CA 91329 Shipping Address: JBL Professional 8500 Balboa Blvd., Dock 15 Northridge, CA 91329 (Do not return product to this address without first obtaining prior authorization from JBL) Customer Service: Monday through Friday 8:00am - 5:00pm Pacific Coast Time in the U.S.A. (800) 8JBLPRO (800.852.5776) www.jblproservice.com On The World Wide Web: www.jblpro.
Section 8: Warranty Information The JBL Limited Warranty on professional loudspeaker products (except for enclosures) remains in effect for five years from the date of the first consumer purchase. JBL amplifiers are warranted for three years from the date of original purchase. Enclosures and all other JBL products are warranted for two years from the date of original purchase. Who Is Protected By This Warranty? Your JBL Warranty protects the original owner and all subsequent owners so long as: A.
Rev A
