Installation Guide

L75ms Owners Manual | Rev1.0 20220201 | Part No. 620-0595-001 | JBL.com/Specialty-Audio/
Pg 8
Connecting Sources
AUX
– Connect using a 3.5mm (1/8”) TRS Stereo female for analog 2ch. Pinout follow standard
conguration. Refer to Rear Panel Connections item E.
PHONO
– Connect the stereo analog output of a turntable and the GND from the turntable to the GND on
the L75ms. Note that this input is phono level can is not intended for analog line level outputs.
Refer to Rear Panel Connections item F.
HDMI-ARC
– Connect to the ARC input of a TV. Select the ARC input on the TV after making this
connection and powering On the L75ms. Refer to Rear Panel Connections item G.
Note:
The HDMI-ARC input on the L75ms does not decode multichannel or Dolby 2ch audio formats. In order
for the L75ms to play content delivered to the HDMI/ARC the source device output must be set to 2ch
PCM. Refer to the owners manual for your source device on details on how to select 2ch PCM output.
Connecting to Network
Wired Network Connection
Connect the Ethernet port on the rear to the port on a
wireless router using a CAT-5e or higher cable. NET on the
top panel will illuminate white once a network connection
has been established. The L75ms is now available on the
network for casting from media players such as Spotify or
iTunes.
Note:
If the NET icon is
RED
then network is disabled and must
be enabled in order to connect. Refer to Enabling and
Disabling Network and Bluetooth and Bluetooth for details.
Wi-Fi Direct Connection
The Google home app is used to connect the L75ms to a Network for Android and Apple iOS devices. If you
choose to not use Google Home and connect an Apple iOS device with Airplay, refer to Wi-Fi Connection
with Airplay.
Wi-Fi Connection with Google Home
1. On your mobile device, download and open the Google Home App.
2. Follow Google Home instructions to add devices.
3. Follow the prompts for adding devices. Note: We recommend giving the speaker a common name so
that it can be easily found for streaming later.
NOTE:
We recommend giving the L75ms a user-friendly name such as
Living Room Speaker
, if you choose
to do so write it down as it will be what is used to connect to the unit for Wi-Fi or Bluetooth streaming.
'ŽŽŐůĞ,ŽŵĞ
Google Home
White=Connected | Blinking=Searching |
Red=Network Disabled