Installation Guide

L75ms Owners Manual | Rev1.0 20220201 | Part No. 620-0595-001 | JBL.com/Specialty-Audio/

Pg 9

Wi-Fi Connection with Airplay

1. Navigate to the network settings for your iOS device.

2. Select Wi-Fi and navigate to

Setup New Airplay Speaker

3. Select the device named

L75MS-XXXXX

. The

XXXXXX

is the corresponding MAC address.

4. Select the network for the L75ms to use and select

5. Follow the on-screen instructions to complete the setup of the L75ms as an Airplay speaker.

Enabling and Disabling Network and Bluetooth

Network and Bluetooth functionality may be turned O󰀨 should it be desired to do so. The same button operation

can be used to turn Network and Bluetooth back On.

Press Source Selection & Volume + on the top panel simultaneously for >3 seconds.

Press Simultaneously

Note:

When the Network and Bluetooth is O󰀨 the following conditions exist.

• Speaker cannot be used for Network or Bluetooth streaming.

• Handheld remote is in-operable and the unit can only be used via the top panel buttons.

• Network icon on top panel with show Red indicating that Network has been turned o󰀨.

Connecting a Bluetooth Device

Connection via Bluetooth is the same as other Bluetooth devices and varies from mobile device to mobile

device. Refer to the owner’s manual for the device being connected prior to performing the following steps.

1. Select the Bluetooth source via the button on the remote or via the top panel source selection.

2. Press & Hold the Bluetooth source or the source selection button for >3 seconds.

3. Navigate to your devices Bluetooth menu and select JBLL75MS from the list. Note if the name was

changed during Google Home setup, that name will be listed.

Select the Bluetooth Source Select L75ms in your devices Bluetooth menuPress & Hold >3 sec