Owner`s manual

13
www.jbl.com
English
PROBLEM SOLUTION
No sound (status LED is not illuminated): Make sure that the power supply is properly connected to the • JBL OnBeat Air and to a working
AC outlet.
Make sure that the • JBL OnBeat Air is turned on by pressing its Power switch.
No sound (status LED is illuminated
white continuously):
Touch the Volume Up (+) button to increase the system volume. •
If you’re using an • AirPlay source, make sure that the AirPlay source is in the AirPlay
mode and that you have selected “JBL OnBeat Air” in its speaker-selection list.
See Listening to AirPlay Streaming Audio, on page 7.
Make sure that the • AirPlay source is joined in the Wi-Fi network.
If you’re using a docked iPod/iPhone/iPad device, make sure that it is properly docked in the •
JBL OnBeat Air.
If you’re using an auxiliary source, make sure that the audio cable is properly connected to the •
JBL OnBeat Air Audio In connector and to the source component’s audio output.
Make sure that the iPod/iPhone/iPad device or other source component is not in the Pause •
mode and that its volume control is not turned all the way down.
No sound (status LED is flashing amber): If you’re using an • AirPlay source, make sure that the JBL OnBeat Air is joined in the Wi-Fi
network. See Configure the JBL OnBeat Air for Wi-Fi Operation, on page 4.
JBL OnBeat Air volume controls do not work with
AirPlay source devices:
Make sure the • AirPlay source is set to “Allow control from remote speakers.”
See Listening to AirPlay Streaming Audio, on page 7.
JBL OnBeat Air remote control does not control
AirPlay source devices:
Make sure the • AirPlay source is set to “Allow control from remote speakers.”
See Listening to AirPlay Streaming Audio, on page 7.
TROUBLESHOOTING YOUR JBL ONBEAT AIR
continued on page 14
English
0297CSK - JBL OnBeat Air OM FORMATERET.indd 13 10/06/11 14:44:37