Owner`s manual

4
If4. you want to view videos or photos from your iPod, iPhone or iPad device on a
TV, plug one end of a composite video cable (not included) into the JBL OnBeat
Air Video Out connector, and plug the other end into your TV’s composite video
input connector.
USB VIDEO OUT AUDIO IN
DC IN
POWER
Composite
Video Cable
(not supplied)
Insert the included AC cord all the way into the power supply (if there is more 5.
than one AC cord, use the correct one for your region). Then connect the power
supply into the JBL OnBeat Air DC In connector and plug it into an AC wall
outlet.
CONFIGURE THE JBL ONBEAT AIR FOR WI-FI
®
OPERATION
Before you can stream audio via AirPlay, you will need to configure your JBL
OnBeat Air for Wi-Fi
®
operation. You will only need to perform this operation the
very first time you try to connect the JBL OnBeat Air to your Wi-Fi network.
NOTE – Easy Setup Application: You can download the JBL OnBeat Air easy
setup application by visiting the following Web site: www.jbl.com/onbeatair.
Make sure your Wi-Fi network is turned on and operating properly.1.
Turn the 2. JBL OnBeat Air on by pressing the Power button on the unit. The
Status LED will flash green and, after several seconds, will change to amber.
Power
Button
Connect
Button
After the Status LED changes to amber, press the 3. JBL OnBeat Air’s Connect
button for three seconds. The unit’s status LED will alternately flash white and
green to indicate the that JBL OnBeat Air is in the Connect mode.
While the 4. JBL OnBeat Air is in the Connect mode, use your Mac, PC, iPhone,
iPod touch or iPad to search for the wireless network device called “JBL OnBeat
Air” and connect to it (see examples, next page: Windows XP (top), Windows
Vista (bottom left), Mac OS (bottom right).
0297CSK - JBL OnBeat Air OM FORMATERET.indd 4 10/06/11 14:44:19