Manual

ManualsBrandsJBL ManualsInstallation SoundHigh Power 2-Way All-Weather Loudspeaker with 12" LF

JBL Incorporated, 8500 Balboa Boulevard, P.O. Box 2200, Northridge, California 91329 U.S.A.

JBL AW266/-BK

REV B

PACKAGE

WIRING DIAGRAM

05-12

Technical Manual

JBL AW266/-BK

SPECIFICATIONS

ACOUSTIC & ELECTRICAL SPECIFICATIONS:

• Nominal Impediance: 8 Ohms

• Long-Term System Power

Rating: 500W, (2000W Peak),100 hrs

• Frequency Response (±3 dB):51 Hz - 18 kHz

• Frequency Range (-10 dB): 40 Hz - 20 kHz

• Maximum SPL: 126 dB SPL (132 dB peak)

• System Sensitivity: 98 dB, 1 Watt @ 1 Meter

• Crossover Frequency: 1.1 kHz

SYSTEM COMPONENTS:

• Cabinet: Enclosure (Not for Sale)

• Grille: 445176-001(BK), 445176-002 (Gray)

• Low Frequency 2262H, 300 mm (12 in) Differential

Transducer: Drive

driver with 75 mm (3 in) dual

voice coil

• DC Resistance: 5.1 ohm

• High Frequency 2432H, 38 mm (1.5 in) exit

SYSTEM COMPONENTS:

(CONT’D)

• Transducer: compression driver, 75 mm (3 in)

vice coil

• DC Resistance: 4.0 ohm +/- 2 ohm

• Crossover Network: 5000158

AURAL SWEEP TEST SPECIFICATIONS:

A. System Aural Sweep Test: 7V Input, 10 Hz to 10 kHz

B. L.F. Aural Sweep Test: 10V Input, 10 Hz to 1 kHz

C. H.F. Aural Sweep Test: 3.0V Input, 300 Hz to 1.0 kHz

PHYSICAL SPECIFICATIONS:

• Enclosure Dimensions: 409 x 732 x 452 mm D

(16.1 x 28.8 x 17.8 in.D.)

• Net Weight: 55.5 lb (25.2 kg.)

WARRANTY INFORMATION:

• Refer to Warranty Statement packed with each product.

Warranty 59660

Network

Assembly

5000158

Wire Harness

446350-001

Driver, High Freq

2432H

(365512-001X)

Diaph Repl

D8R2432

Driver, Low Freq

2262HPL

(338312-004X)

Cone Repl

C8R2262

YEL

YEL/BLK

GRN

GRN/BLK

NOTE: INDIVIDUAL PARTS FOR THE ABOVE CROSSOVER ARE NOT AVAILABLE.

A COMPLETE REPLACEMENT ASSEMBLY SHOULD BE ORDERED.

SEE NETWORK SCHEMATIC (5000158) PAGE 2

SEE WIRE HARNESS DIAGRAM (44350-001) PAGE 3

70V/100V Transformer Taps: 70V: 400W, 200W, 100W

100V: 400W, 200W

Owner’s Manual

5012278

Carton

5012280

Top Tray

5019840

Bottom Filler

5019841

U-Bracket Filler

5019842

PKG, Mircofoam (6)

49790P

Summary of content (4 pages)

PAGE 1
JBL Incorporated, 8500 Balboa Boulevard, P.O. Box 2200, Northridge, California 91329 U.S.A. Technical Manual JBL AW266/-BK SPECIFICATIONS ACOUSTIC & ELECTRICAL SPECIFICATIONS: • Nominal Impediance: 8 Ohms • Long-Term System Power Rating: 500W, (2000W Peak),100 hrs • Frequency Response (±3 dB):51 Hz - 18 kHz • Frequency Range (-10 dB): 40 Hz - 20 kHz • Maximum SPL: 126 dB SPL (132 dB peak) • System Sensitivity: 98 dB, 1 Watt @ 1 Meter • Crossover Frequency: 1.
PAGE 2
JBL AW266/-BK NETWORK ASSEMBLY SCHEMATIC - (500158) 1.50mH + Connector 2-pin 22uF 250V 2.4 ohms Connector 4-pin 13.0uF 250V 4.3uF 250V 33.0uF 250V 0.75ohms Faston, Female + 0.187 6.2ohms 3.9ohms Faston, Female - 0.250 Connector 6-pin 0.620mH 0.360mH 5.6uF 250V JBL AW266/-BK Individual Parts for the above crossover are not available. A complete replacement assembly should be ordered.
PAGE 3
JBL AW266/-BK WIRE HARNESS DIAGRAM - (446350-001) Molex Connector #0390-12025 BLK YEL RED BLU VIO ORG Barrier Strip Molex Connector #0390-12025 Molex Connector #0015-244048 Molex Connector #0015-244048 JBL AW266/-BK
PAGE 4
JBL AW266/-BK COMPONENT EXPLODED VIEW Driver, High Freq. 2432H (365512-001X) Diaph Repl D8R2432 Stud (4) 75815 1/4-20 x 1.5 “ LG Grille Assembly 445176-002 (Gray) 445176-001 (BK) Waveguide 443454-001 Screw (8) 804-01156-16 10-32 x 1 PH,PAN,HD,M/S 18-8 Screw (14) 802-51056-20 6-32 1 1/4 OVAL,PH,SS Logo Badge 5007401 Nut (4) 834-30010-00 1/4- 20 KEP,BLK ZINC, LCS,RIGHT Network Assembly 50000158 Screw (6) 883-41110-12 8 x 3.4 PAN,PH,PB,BLK ZINC,LCS Driver, Low Freq.