JBL BassPro Go Product photo (confidentiality) Owner's Manual EN Owner's Manual FR Owner's Manual ES Owner's Manual PT Owner's Manual IT Owner's Manual DE Owner's Manual RU Owner's Manual SV Owner's Manual FI Owner's Manual PL Owner's Manual NL Owner's Manual DA Owner's Manual JP Owner's Manual KO Owner's Manual CHS Owner's Manual CHT Owner's Manual ID Owner's Manual TR
THANK YOU FOR YOUR PURCHASE . . . Your product has been designed to provide you the performance and ease of operation you expect from JBL. Take time to read this manual before operating or installing your BassPro Go. This manual describes general installation guidelines and operation instructions. Please note that proper installation of mobile audio components requires qualified experience with mechanical and electrical procedures.
JBL BassPro Go PRODUCT DESCRIPTION: JBL BassPro Go is a powered subwoofer designed to easily mount and charge in any vehicle, augmenting the output of fullrange speakers at the lowest frequencies, with quick-disconnect features to become a portable Bluetooth speaker. It features easy-to-use controls and a convenient safety cover to help protect the speaker when used out of the vehicle, and to provide an IPx5 marine rating.
Power/Protect indicators The BassPro Go features a power button on the control panel that indicates the speaker’s modes of operation. 4. Release the handle to finish securing in place. EN • It will illuminate in white when the speaker is in Subwoofer Mode in the vehicle. • It will illuminate in green when the speaker is in Full-Range Mode.
Setting the gain JBL BassPro Go When the BassPro Go is docked in your vehicle, you will need to match the gain (input sensitivity) to output of the signal it receives from your source unit. To set the gain: 1. Start with gain control switch set to 1V. 2. Choose music with substantial bass content and turn the volume control on your receiver to ¾ of its total output. 3. Increase the gain one step at a time by pressing the Volume Up (+) button, listening carefully to the bass output.
Using the speaker in Full-Range Mode To put the BassPro Go in Full-Range Mode, press and hold the Connect button and Play/Pause button simultaneously for 5 seconds. You can use the BassPro Go as a full-range speaker in the vehicle, or as a portable speaker. EN The power button will turn green and the five white LEDs will flash and an audible alert will sound to indicate that the speaker is in Full-Range Mode.
2. The devices will automatically connect. When they are connected, the power button will turn blue. 3. If the devices do not connect, the power button will return to white. Try the linking process again. Amplifier fuse keeps blowing. Monitoring battery level in portable mode Distorted audio. The LED readout will show you the level of the battery when in portable mode. • Gain is not set properly. Check and adjust settings. Amplifier or source unit may be defective.
哈曼产品保修卡 机身编号 产品型号： 销售（安装调试）日期： 20 _ 年 _ 月 _ 日 发票号码： 用户姓名： （销售者印章） 联系电话： 地址（邮编）： 重要提示：根据国家“三包”规定，您必须完整填写本凭证并与购买发票原件同时出示方可享受相关售后服务。为了保护您的权益，请您购买产品时索取合法有效的发 货票并请经销商在本凭证盖具包括名称、地址、电话等信息的印章。本凭证内容与商品实物标识不符或者涂改的将不提供售后服务，请务必妥善保管。请您核对产品机 身编号，编号缺失、涂改或经查询非本公司授权经销商渠道销售产品均不提供售后服务。更多信息请您阅读下面的产品保修条例。 合 格 证 哈曼（中国）投资有限公司 公司地址：上海市黄浦区南京西路 288 号 3004 室 中国大陆地区客服热线：400 630 6678 扫描二维码获取全国联保 产品保修期： JBL/INFINITY 汽车音响产品提供一年的保修期，自消费者在本公司授权经销商、授权安装点购买之日（即，购买发票所述的日期）起算。 保修范围： 产品在上述保修期内出现故障，且经本公司授权经销商、授权安装点或授权维修站工程师检测确认属于正常使用
FCC/IC warning sheet Caution: The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s).
