Spec sheet

Control
®
25AV-LS
Two-Way, Professional
Compact Loudspeaker
for Life / Safety Applications
Professional Series
Key Features:
c UL 1480 UUMW Listed for Use in Fire Alarm
and/or Emergency Communication Systems
(file S7232); EN54-24 certified (Certificate No.
0359-CPR-00245)
c Extremely Smooth Frequency Response
c Aluminum Grille with Polyester Powder
Coating for Enhanced Durability
c 60 Watt Transformer for 70V or 100V
Lines, with 8 ohm Bypass
c SonicGuard™ Overload Protection
c 130 mm (5¼”) Polypropylene Coated
Woofer, 10 mm (¾”) Titanium Coated
Horn-Loaded Tweeter
c Includes InvisiBall
®
Mounting Hardware
and Sealed Input Panel Cover
c Captive Screw-Down Input Terminals
c 110° x 85° High-Frequency Horn
Applications:
The Control® 25AV-LS is built on the
same platform as our popular Control 25AV
and is UL 1480 UUMW Listed for use in fire
alarm and/or emergency communication
systems. The Control 25AV-LS utilizes a
deep cabinet, high power components and
complex network to achieve extremely
smooth high fidelity performance from
a compact 2-way loudspeaker. Premium
performance capability and even coverage
ensures excellent sound quality throughout
the listening area.
A top-quality, low saturation transformer,
enables the loudspeaker to be used on
either 70 volt or 100 volt distributed speaker
lines, with similar fidelity performance to the
8 ohm bypass position.
The patented InvisiBall
®
mounting method
is simple to install, aims easily, and provides
a high degree of theft deterrence. The cabinet
accepts a variety of paints to match any
décor. Weather resistance is maximized
by utilizing an aluminum grille featuring
polyester powder coating and liquid-tight
MTC-PC2 terminal covers.
Coating the woofer cone in polypropylene
and terminating its circumference in
JBL’s WeatherEdge
TM
, a seamless, butyl
rubber extension of the woofer surround,
protects critical transducer elements.
The polycarbonate tweeter diaphragm is
reinforced with a thin film of titanium for
added rigidity and endurance. Nickel/zinc
rust-resistant terminals ensure a secure
input connection.
Specifications:
System: Frequency Range (-10 dB)
1
: 90 Hz - 20 kHz
Power Capacity
2
: 200 Watts Continuous Program Power (at 8 ohm bypass mode)
100 Watts Continuous Pink Noise (at 8 ohm bypass mode)
60 Watts (at 60W tap setting)
Nominal Sensitivity : 87 dB, 1W at 1 m (1 kHz – 10 kHz, ave., at 8 ohm bypass mode);
71 dB, 1W at 4m per EN54-24 (100 Hz – 10 kHz, ave., 60W tap)
Nominal Coverage Angle: 110° x 85° (1 kHz to 16 kHz, ave.)
Typical Horizontal: 120° at 4 kHz, 120° at 2 kHz, 155° at 1 kHz, 360° at 500 Hz
Typical Vertical: 100° at 4 kHz, 85° at 2 kHz, 160° at 1kHz, 360° at 500 Hz
Directivity Factor (Q): 4.8 (500 Hz to 4kHz)
Directivity Index (DI): 6.5dB (500 Hz to 4kHz)
Rated Maximum SPL: 107 dB @ 1 m (3.3 ft) average, 113 dB peak, at 8 ohm
bypass mode
3
; 89 dB at 4 m (13.2 ft) average, at
60W tap setting, measured.
Rated Impedance: 8 ohms (in bypass, position 5, mode) - tap 1: 667 ohms;
tap 2: 333 ohms; tap 3: 167 ohms, tap 4: 83 ohms (typical)
Transformer Taps: 60W 30W, 15W, (& 7.5W @ 70V)
Transducers: LF Driver: 130mm (5.25 in) with polypropylene coated paper cone
with WeatherEdge surround, 25 mm (1 in) voicecoil
on kapton former
HF Driver: 20mm (.75 in) titanium coated PEI
Enclosure: Input Connectors: Captive screw-down terminals, zinc-plated copper base,
nickel plated metal screws/washers, accepts up to 9 mm
outside 4 mm inside open lug, plus bare wire up to
12 AWG (2.5 mm)
Cabinet Material: ABS, (materials rated UL94-5VA)
Grille: Aluminum with polyester powder coating
 SafetyAgency: UL1480-UUMWListed(S7232),EN54-24:2008certied
  (CerticateNo.0359-CPR-00245),NFPA90,NFPA70A,
and in accordance with the requirements of IEC60849/EN60849
Dimensions (H x W x D): 236 x 186 x 159 mm (9.3 x 7.4 x 6.3 in)
Net Weight: 3.8 kg (8.4 lbs) ea
Shipping Weight: 8.6 kg (19 lbs) pair
Included Accessories: 1 pc MTC-PC2 input panel cover, Invisiball mounting base,
6 mm x 100 mm Invisiball hex wrench
Optional Accessories: MTC-25V for vertical columnar mounting of up to 3 speakers
MTC-25/23H for horizontal splaying of 2 speakers. Three
brackets array either 3 or 6 speakers in a hanging array module
for 360° horizontal coverage.
MTC-28/25CM to install speaker down from the ceiling.
See JBL Control Contractor Bracket and Adapter Handbook.
1
Half-space
2
Continuous Pink Noise rating is IEC-shaped pink noise with a 6 dB crest factor for 100 hours continuously. Continuous Program power is aconservative expression of the system’s ability
to handle normal speech and music program material, and is defined as 3 dB above the Continous Pink Noise Rating. JBL continually engages in research related to product improvement.
Changes introduced into existing products without notice are an expression of that philosophy.
3
Calculated based on power rating and measured sensitivity, exclusive of power compression.
Note: Reference Axis=0 degrees/on axis, Reference Plane=on axis, Horizontal Plane=on axis.
JBL continually engages in research related to product improvement. Changes introduced into existing products without notice are an expression of that philosophy.