JBL CINEMA SB450 OWNER’S MANUAL
TABLE OF CONTENTS INTRODUCTION 3 INCLUDED ITEMS 3 TOP PANEL CONTROLS AND REMOTE CONTROL 3 SOUNDBAR REAR PANEL CONNECTIONS AND CONTROLS 4 SUBWOOFER REAR PANEL CONNECTIONS AND CONTROLS 5 SOUNDBAR PLACEMENT 5 PLACING THE SOUNDBAR ON A TABLE 5 WALL-MOUNTING THE SOUNDBAR 5 SUBWOOFER PLACEMENT 6 CONNECTIONS 6 SOUNDBAR AUDIO/VIDEO CONNECTIONS 6 POWER CONNECTIONS 7 USING YOUR SOUNDBAR SYSTEM TURNING THE SOUNDBAR ON AND OFF 7 TURNING THE SUBWOOFER ON AND OFF 7 Pairing the Units for Wirele
English INTRODUCTION Wall Mount Bracket Thank you for purchasing the JBL Cinema SB450. The JBL Cinema SB450 is designed to bring an extraordinary sound experience to your home entertainment system. We urge you to take a few minutes to read through this manual, which describes the product and includes step-by-step instructions to help you set up and get started.
Bass Level Control (remote control only): Press these buttons to adjust the overall level of the subwoofer to your preference. Harman Volume (remote control only): Press this button to activate Harman Volume. This feature helps to maintain the volume level constant and minimizes big variations in volume level when listening to music or watching television. See the “Using Harman Volume” section for more information.
English SUBWOOFER REAR PANEL CONNECTIONS AND CONTROLS 2 SOUNDBAR PLACEMENT PLACING THE SOUNDBAR ON A TABLE If your TV is placed on a table, you can place the soundbar on the table directly in front of the TV stand, centered with the TV screen. As long as the surface of the table is flat, the soundbar will rest on its metal feet. Set the soundbar’s EQ switch in the “Table” position. See Soundbar Rear-Panel Controls and Connections.
IMPORTANT: Do not plug the soundbar’s power cord into an AC outlet at this time. 4. Set the soundbar’s EQ switch in the “Wall” position. 5. Attach the soundbar to the bracket by sliding the bracket’s upper tabs into the slots on the back of the soundbar. The soundbar’s slots allow you to adjust the soundbar’s angle on the wall to ensure that it is level. TV Out connection. The soundbar will pass video from source devices to the TV.
English POWER CONNECTIONS After verifying that all of the source connections have been made properly, plug the supplied power cords into the soundbar’s and subwoofer’s Power Cord connectors, and plug the other ends into active, unswitched AC outlets. Do NOT plug this cords into the accessory outlet found on some audio components.
time without reaching for the remote control to switch between the two devices. MUTING THE SYSTEM Momentarily press both of the soundbar’s top-panel volume buttons at the same time, or press the remote control’s Mute button to mute the system (The Power LED flashes.) Momentarily press either of the soundbar’s Volume buttons or press the remote’s Mute button again to un-mute the system.
English 3. 4. 5. 6. Press the JBL Connect button on your other JBL speaker. Once the soundbar and secondary JBL speaker are connected, the LED will turn solid white. Stream music from your wireless device. You will hear sound on both speakers The volume is synchronized between the two devices— turning the volume up or down on one device will affect the other. To disable JBL Connect, turn off the second device.
SUBWOOFER CROSSOVER CONTROL The subwoofer’s Crossover control adjusts the subwoofer’s cutoff between 40Hz and 200Hz. The higher you set the Crossover control, the higher in frequency the subwoofer will operate and the more its bass will “overlap” that of the soundbar. This adjustment helps achieve a smooth transition of bass frequencies between the subwoofer and the soundbar for a variety of different rooms and subwoofer locations. To set the Crossover control, listen for the smoothness of the bass.
English TROUBLESHOOTING If your JBL Cinema SB450 does not perform the way you think it should, check whether the problem is covered in this section before contacting you dealer or a JBL representative. Problems Solutions If the speaker does not turn ON • Check if the speaker AC power cord is plugged into a working AC outlet and that the cable is plugged into the speaker. If there is no sound coming from the speaker • Check the power is set to ON, then check to see if the volume is turned up.
Торговая марка : JBL Назначение товара : Активная акустическая система Изготовитель : Харман Интернешнл Индастриз Инкорпорейтед, США, 06901 Коннектикут, г.Стэмфорд, Атлантик Стрит 400, офис 1500 Страна происхождения : Китай Импортер в Россию : OOO “ХАРМАН РУС СиАйЭс“, Россия, 127018, г.Москва, ул. Двинцев, д.12, к 1 Гарантийный период : 1 год Информация о сервисных центрах : www.harman.com/ru Срок службы тел.