JBL CINEMA SB250 ® Quick Start Guide Note: For complete information about using all of your JBL Cinema SB250, download the full Owner’s Manual from www.jbl.com.
1 What’s in the box Soundbar x1 Wireless subwoofer x1 Remote x1 BASS Wall mount accessories x1 Optical cable x1 Analog aux cable x1 Soundbar power cable x1 Subwoofer power cable x1
2 Buttons and Controls 2a. Remote control 2 1 3 4 6 5 7 8 9 BASS 12 10 11 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) Power on/Standby Bluetooth SoundShift AUX-in Optical Audio feedback on/off Mute Volume +/Bass volume +/Harman Display Surround Stereo Harman Volume Note: Before using the remote control, remove the plastic tab protecting the battery at the bottom of the remote control. 2b.
2d. Subwoofer (SB250) 1 2 3 4 5 3 1) 2) 3) 4) 5) Power indicator Phase adjustment (0–180°) Wireless pairing button Wireless pairing indicator Power input AC Connections Power (Software Input AC update only) AUX-in Optical Remove Caps Note: After you are done with your installation and source connections, please ensure the power switches on the soundbar and subwoofer are on before operating the system.
4 Placement Wall mounting Note: Please use flat (countersunk) head type screw Note: For wall mounting, we recommend removing the feet of the soundbar by simply unscrewing and storing them for future use.
5 Subwoofer pairing 1s Press the pairing button on the back of the soundbar to enter the wireless pairing mode (blue flashing LED) LED behavior Pairing mode Connected Standby mode 1s 6 Press the pairing button on subwoofer for more than 1 second to pair the subwoofer to the soundbar.
Stereo/Harman Display Surround LED behavior Stereo mode Harman Display Surround 8 Remote learning feature The soundbar has the ability to learn the volume control and power infrared (IR) codes of your IR TV remote control. To program the soundbar to respond to your TV remote control: 1. Press and hold the top panel 'Surround' key until the system enters learning mode (the LED will blink orange). 2. VOLUME + : Press 'Volume +' on the soundbar and then press 'Volume +' on the TV remote control. 3.
10 • Frequency response: 45Hz – 20kHz • Maximum SPL: 100dB • JBL Cinema SB250 includes two-way, dual driver left and right speaker modules, each with one 55mm (2.25") full range drivers and a 32mm (1.25") dome tweeter • Wireless, powered subwoofer with a 165mm (6.
