Owner`s manual

4
For more than 60 years, JBL has been involved in every aspect of
music and film recording and reproduction, from live performances
to the recordings you play in your home, car or office.
We’re confident that the JBL system you have chosen will provide
every note of enjoyment that you expected – and that when you think
about purchasing additional audio equipment for your home, car or
office, you will once again choose JBL.
Please take a moment to register your product on our Web site at
www.jbl.com. It enables us to keep you posted on our latest
advance-ments, and helps us to better understand our customers
and build products that meet their needs and expectations.
The JBL
®
On Air Control
®
2.4G is an advanced wireless loudspeaker
system that allows you to enjoy your favorite music in remote
locations around your home, or to add surround speakers to your
home theater system without running wires to the back of the room.
To ensure trouble-free performance, please carefully read these
instructions completely before connecting or using the system.
UNPACKING THE SYSTEM
Carefully unpack the system. If you suspect damage from transit,
report it immediately to your dealer and/or delivery service.
Keep the shipping carton and packing materials for future use.
Open the package and verify the following contents:
Included
1 x Transmitter module
1 x Universal power supply for transmitter
1 x 120V 2-Prong AC power cord for transmitter power supply
1 x 230V 2-Prong AC power cord for transmitter power supply
1 x Wall-mount bracket for transmitter with 2 x panhead
M3 x 4 machine screws for attaching wall-mount bracket
to transmitter
4 x Small round self-adhesive feet – to be attached on
transmitter left side panel if transmitter to be used vertically
1 x Active speaker/receiver (left-channel speaker)
1 x Universal power supply for active speaker/receiver
1 x 120V 3-Prong AC power cord for active speaker/receiver
power supply
1 x 230V 3-Prong AC power cord for active speaker/receiver
power supply
1 x Wall-mount holder for active speaker/receiver universal
power supply
1 x Passive speaker (right-channel speaker)
2 x Wall-mount rotatable brackets for active and passive speakers
(includes bar wrench and backup cords)
1 x Remote control
1 x Interconnect cable (1m/3.3 ft. RCA – RCA)
1 x Interconnect cable (1m/3.3 ft. RCA – 1/8-inch mini plug)
10m/33 ft. x Speaker wire
1 x Owner’s manual (multilanguage)
1 x USA warranty sheet
THANK YOU FOR CHOOSING JBL
Remote Control
Wireless Transmitter
Left/Active Speaker
(Rear)
Right/Passive
Speaker
INPUTMUTE
VOL
1
2
0
3
ID
CODE
1234
TO RIGHT SPEAKER
+–
4
5
68
7
LEFT-CHANNEL SPEAKER
SUB-OUT LINE-IN
DC 20V
+–
9
RIGHT-CHANNEL SPEAKER
TO LEFT SPEAKER
RL
ID
CODE
1234
A
B
CD
INPUT
34199_Control_2_4G_Eng 02/08/07 14:07 Side 4