Data Sheet

䉴 Control 50S/T and Control 52 Surface-Mount Subwoofer-Satellite Loudspeaker System
Control 50 Subwoofer-Satellite System Specifications
Frequency Range (-10 dB)
1
: 32 Hz – 20 kHz
Frequency Response (±3 dB)
1
: 50 Hz – 17 kHz
Power Capacity
2
: 200 Watts Continuous Program Power (100 hrs)
100 Watts Continuous Pink Noise (100 hrs)
Nominal Sensitivity (2.83V, 1m)
1
: 87 dB with 4 satellites
85 dB with 2 satellites
(subwoofer center of wall, higher sensitivity depending on subwoofer boundary loading, see application note)
Nominal Impedance: 4 ohms (in bypass/thru mode) with 4 satellites
8 ohms (in bypass/thru mode) with 2 satellites
Transformer Taps: 80W, 40W, 20W, (& 10W @ 70V), plus bypass/thru (listed as 8⍀ on switch to indicate subwoofer impedance)
Control 50S/T Specifications
Frequency Range (-10 dB)
1
: 32 Hz – 200 Hz
Frequency Response (±3 dB)
1
: 50 Hz – 150 Hz
Power Capacity
2
: 300 Watts Continuous Program Power (2 hrs)
150 Watts Continuous Pink Noise (2 hrs)
200 Watts Continuous Program Power (100 hrs)
100 Watts Continuous Pink Noise (100 hrs)
Nominal Sensitivity (2.83V, 1m)
1
: 95 dB (near corner), 89 dB (center of wall)
Rated Maximum SPL (1m): 115 dB average, 121 dB peak (near corner)
109 dB average, 115 dB peak (center of wall)
Nominal Impedance: 8 ohms (in bypass/thru mode)
Transformer Taps: 80W, 40W, 20W, (& 10W @ 70V), 8 ohm bypass/thru
Transducer:
Driver: 200 mm (8 in) with polypropylene cone, butyl rubber surround, 38 mm (1.5 in) 4-layer copper-clad coil, vented aluminum
former
Enclosure:
Input Connectors: Six removable locking 2-pin connectors with screw-down terminals. Max wire 12 AWG (2.5 mm
2
)
Material: Top, bottom, front & bottom: Structural plywood. Port & terminal panels: MDF. Grille: Painted zinc-plated metal.
Dimensions (H x W x D): Cabinet: 356 x 391 x 203 mm (14.0 x 15.4 x 8.0 in)
Wall Bracket: 15 mm (0.6 in) deep
Wall Bracket: 2.3 mm (0.9 in) thick zinc-plated and painted cold-rolled steel
Net Weight: 9.0 kg (20 lbs)
Shipping Weight: 10.2 kg (23 lbs)
Included Accessories: Wall bracket (both speaker and wall parts) with 4 pcs M6 screws to attach to speaker, terminal cover, 6 pcs 2-pin locking
connectors, M6 screw for safety lanyard attachment.
Control 52 Specifications
Frequency Range (-10 dB)
1
: 140 Hz – 20 kHz
Frequency Response (±3 dB)
1
: 180 Hz – 17 kHz
Power Capacity
2
: 50 Watts Continuous Program Power (2 hrs)
25 Watts Continuous Pink Noise (2 hrs)
30 Watts Continuous Program Power (100 hrs)
15 Watts Continuous Pink Noise (100 hrs)
Nominal Sensitivity
1
: 85 dB (4.0V/1m = 1W)
82 dB (2.83V, 1m)
Nominal Coverage Angle
3
: 150° x 150° (omnidirectional)
Rated Maximum SPL (1m): 94 dB average, 100 dB peak
Nominal Impedance: 16 ohms
Transducer:
Driver: 60 mm (2.5 in) with polypropylene cone, butyl rubber surround, 19 mm (0.75 in) copper-clad coil, vented Nomex
®
former,
secondary bucking magnet, and copper sleeved pole piece for high frequency extension.
Enclosure:
Input Connector: Removable locking 2-pin connector with screw-down terminals. Max wire 12 AWG (2.5 mm
2
)
Material: High impact polystyrene, painted zinc-plated metal grille.
Dimensions (H x W x D): Cabinet: 115 x 84 x 96 mm (4.5 x 3.3 x 3.75 in)
Wall bracket: 51 mm (2.0 in)
Net Weight: 0.7 kg (1.5 lbs)
Shipping Weight: 0.8 kg (1.8 lbs)
Included Accessories: Wall bracket (both speaker and wall parts), 2-pin locking connector.
1
Half-space (mounted on wall).
2
Continuous Pink noise rating is IEC-shaped pink noise with a 6 dB crest factor for 100 hours continuously. Continuous Program Power is a conservative expression of the system’s ability to
handle normal speech and music program material, and is defined as 3 dB above the Continuous Pink Noise rating.
3
Half-space, average 1 kHz – 4 kHz
JBL continually engages in research related to product improvement. Changes introduced into existing products without notice are an expression of that philosophy.
77037_JBL.Ctrl50.qxd 7/29/09 12:31 PM Page 2