User manual

UNPACKING THE BRACKET AND CABLE KIT

Carefully unpack the bracket and cable assembly. If you

suspect damage from transit, report it immediately to your

dealer and/or delivery service. Keep the shipping carton and

packing materials for future use. Open the package and verify

the following contents:

Included:

ATTACHING POLE TO POLE-MOUNT BRACKET

For Larger-Diameter Drop Tubes

1. Run the appropriate wiring down through the drop tube. Slide

the drop tube through the pole-mount-bracket cap.

2A. Slide the pole-mount bracket up onto the drop tube,

aligning the pinholes on the bracket with those on the drop

tube.

INSTALLATION

Pole Bushing

(used for

smaller-diameter

drop tubes)

Pole-Mount-Bracket Cap

Clevis Pin

Cotter Pin

Pole-Mount Bracket

(4) #10-32 x 2" Screws

Pole-Mount-Bracket Cover

Cable Assembly

Pole-Mount-Bracket Ca

Drop Tube

Pole-Mount Bracket Ca

Drop Tube

ole-Mount Bracket

Pinholes

CAUTION: Installation must be

done by qualiﬁ ed persons using safe

rigging standards

The installer is responsible for proper

selection and use of mounting hardware, to

properly and safely pole-mount the speakers.