User manual

For Smaller-Diameter Drop Tubes
2B. When using a smaller drop tube, use the pole bushing
when running the wiring down through pole-mount-bracket cap.
This will help to eliminate pole wobble.
3. Slide the clevis pin through the aligned holes in the pole-
mount bracket and drop tube. Secure the clevis pin by inserting
the cotter pin through the hole in the clevis pin.
4. The pole-mount bracket can now hold the weight of the
speakers.
SPEAKER MOUNTING
1. Set the tap selector switches to the desired 70V/100V tap.
THRU position is not advised due to parallel speakers providing
too low of an impedance for most low impedance power
amplifi ers.
2. Connect the stripped bare wires to the input terminals of the
JBL Control CRV speakers.
Pole Bushin
g
Pole-Mount-Bracket Ca
p
Drop Tube
Pole-Mount Bracket
Clevis Pin
C
otter Pin
Clevis Pin
Pole-Mount-BracketCa
p
Drop Tube
P
ole-Mount Bracket
INSTALLATION
12