User manual

7. VERTICAL BRACKET ORIENTATION —Regardless of
whether you choose a vertical or horizontal orientation for the
speaker,when mounting the JBL Control CRV speaker to a
single wall surface, you should always install the wall-mounting
bracket in a vertical orientation, as shown.
An alternate
vertical orientation
is shown here
Vertical
orientation
Bracket Cover
Bracket Cover
Vertical
orientation
WALL CORNER MOUNTING
(Horizontal Speaker Orientation)
When deciding upon a location for the JBL Control CRV
speaker, take care NOT to install the mounting bracket closer
than 3” (7.6 cm) (horizontal) and 8-1/2” (21.5 cm) (vertical) to
the ceiling. Any closer than the minimum measurements will
not allow the clearance needed to position and slide the JBL
Control CRV speaker into the mounting bracket.
1. Run the wiring to the location desired for mounting the JBL
Control CRV speaker.
2. Attach the mounting bracket to the wall. Be sure to use
appropriate anchors.
8-1/2" Minimum
distance from ceiling
3"
Minimum
(horizontal mount)
distance
from ceiling
(vertical mount)
Appropriate
anchors
INSTALLATION
4
CAUTION: Installation must be
done by qualifi ed persons using
safe rigging standards .
The installer is responsible for proper selection
and use of mounting hardware, to properly and
safely wall-mount the speakers
.