User manual

6. To orient the JBL logo into the correct position, pull the JBL
logo slightly outward from the speaker grille and rotate. The
JBL logo is held in place by a spring. Peel the adhesive cover
off the mounting-bracket cover and attach to the top and bottom
of the mounting assembly.
HALF-ROUND WALL
MOUNTING
(Horizontal or Vertical Orientation)
1. Secure two corner/wall-mounting brackets together by using
two #10-32 x 1/2” screws provided, as shown. Attach the
mounting bracket to the wall.
When deciding upon a location for the JBL Control CRV
speaker, take care NOT to install the mounting bracket closer
than 3” (7.6 cm) (horizontal) and 8-1/2” (21.5 cm) (vertical) to
the ceiling. Any closer than the minimum measurements will
not allow the clearance needed to position and slide the JBL
Control CRV speaker into the mounting bracket.
Bracket
Cover
INSTALLATION
#10-32 x 1/2" Screws (2)
7
CAUTION: Installation must be
done by qualifi ed persons using
safe rigging standards .
The installer is responsible for proper selection
and use of mounting hardware, to properly and
safely wall-mount the speakers
.
3"
Minimum
(horizontal mount)
distance
from ceiling
8-1/2"
Minimum
(vertical mount)
distance
from ceiling
3” Minimum
distance from ceiling
(horiontal mount)
8-1/2” Minimum
distance from ceiling
(vertical mount)