Brochure

10 Watt Multi-Tap Transformer for 100V or
70V Distributed Speaker Lines
8 Ohm Direct Setting
Included Wall-Mounting Bracket
Professional Drivers and Network
CSS-1S/T
Compact Two-Way
100V/70V/8-Ohm
Loudspeaker
System:
Frequency Range (-10 dB): 85 Hz – 18 kHz
Frequency Response (+/- 3 dB): 120 Hz – 16 kHz
Power Capacity
1
: 60 Watts
Sensitivity
2
: 86 dB SPL, 1W (2.83V) at 1m (3.3 )
Maximum SPL
3
: 106 dB at 8 Ohm Direct setting; 96 dB at
10W setting
Nominal Coverage
2
: 120ºH x 120ºV
Directivity Factor (Q)
2
: 6.2
Directivity Index (DI): 7.9 dB
Nominal Impedance: 8 ohms (in 8Ω DIRECT mode, selectable on
back panel)
Transformer Taps: 10 W, 5 W (& 2.5W @ 70V)
Crossover Frequency: 4.3 kHz
Transducers:
LF Driver: 135 mm (5.25 in) low frequency driver
HF Driver: 19 mm (0.75 in) polycarbonate dome tweeter
Input Connectors: Spring-loaded terminals
Enclosure :
Enclosure Material: Polypropylene Structural Foam
Color: Black
Dimensions: 229 mm x 159 mm x 143 mm (9.0 in x 6.3 in
x 5.6 in)
Net Weight (each): 2.0 kg (4.5 lb)
Shipping Weight (pair): 4.8 kg (10.5 lb)
Included Accessories: Wall-mounting bracket assembly
Commercial Series
JBL continually engages in research related to product improvement. Some materials, production methods and design
renements are introduced into existing products without notice as a routine expression of that philosophy. For this reason,
any current JBL product may dier in some respect from its published description, but will always equal or exceed the original
design specications unless otherwise stated.
Specications:
CSS-1S/T is a versatile, compact two-way
loudspeaker designed for use on 100V or 70V
distributed speaker lines, or in 8 ohm direct
mode. e 135 mm (5¼ inch) low frequency
loudspeaker and 19 mm (¾ inch) polycarbonate
dome tweeter reproduce full-range sound
quality for foreground or background music
and are voiced for maximum speech clarity and
intelligibility.
e rugged enclosure is tted with an
included, easy-to-install ball-type wall-mount
bracket that can pivot to aim the speaker in a
variety of directions, or the speaker can be aimed
straight out from the wall. e at bottom
surface of the cabinet allows the speaker to be
set on a surface such as a shelf.
A multi-tap, multi-voltage transformer
provides taps of 10 and 5 Watts when driven
from a 100V distributed speaker line and
10, 5 and 2.5 Watts when driven from a 70V
distributed speaker line. Tap selection is
accomplished via a switch that is accessed
from the back panel. e speaker has a power
handling of 60 Watts continuous average pink
noise (100 hrs continuously) when set in its 8
Ohm Direct setting.
Key Features:
Applications:
1
IEC Standard, full bandwidth pink noise with 6 dB crest factor, 100 hr duration.
2
Average, 1 kHz to 10 kHz
3
Calculated based on power handling and sensitivity, exclusive of power compression at high levels.