User manual

ManualsBrandsJBL ManualsSpeaker UnitsELA flush mount speaker 40 W 100 V, 70 V, 25 V White 1 pc(s)

JBL Incorporated, 8500 Balboa Boulevard, P.O. Box 2200, Northridge, California 91329 U.S.A.

JBL CSS8018 REV A

PACKAGE COMPONENT EXPLODED VIEW

01-11

Technical Manual

JBL CSS8018

SPECIFICATIONS

ACOUSTIC & ELECTRICAL SPECIFICATIONS:

• Nominal Impedance: 8 Ohms

• Driver Power Handling: 20W

• Frequency Range (- 10 dB):

Driver/Grille Assembly: 50 Hz - 17 kHz

Installed in CSS-BB

BACKCAN: 90 Hz - 17 kHz

• Driver Sensitivity (mid-range)

(1W [2.83V], 1m, 2k - 6k Hz):97 dB

SYSTEM COMPONENTS:

• Transducer: 200 mm (8 in) speaker, 25 mm (1 in)

diameter voice coil with a Kapton™

coil-former

• DC Resistance: 7.8 ohm

AURAL SWEEP TEST SPECIFICATIONS:

System Aural Sweep Test:

25V Input (2.5w Tap), 50 Hz to 18 kHz

PHYSICAL SPECIFICATIONS:

• Net Weight (ea): 3.5 lb (1.58 kg.)

WARRANTY INFORMATION:

• Refer to Warranty Statement packed with each product.

• Transformer Taps:

Warranty Card

59660

Instruction Sheet

445673-001

Carton

445678-001

Inner Carton

445677-001

Inside Carton Wrap

Liner

455676-001

Main PE Bag

445674-001

Orange Green Gray Yellow Black

25V 1.3W 2.5W 5W 10W COM

White Blue Brown Orange Black

70V 1.3W 2.5W 5W 10W COM

100V 2.5W 5W 10W N/C COM

Screw (2)

882-31910-10

6 x 3/4

PH,WOOD,BLK ZINC

Transformer

444967-001

10W

Nut (6)

445670-001

Washer (4)

445669-001

M4 Non-Slip

Driver

444965-001

Grille

444960-001

Screw (4)

882-31410-40

6 x 2 1/2

PH,WOOD,BLK ZINC

Accessory Bag

445675-001

Summary of content (2 pages)

PAGE 1
JBL Incorporated, 8500 Balboa Boulevard, P.O. Box 2200, Northridge, California 91329 U.S.A. Technical Manual JBL CSS8018 SPECIFICATIONS ACOUSTIC & ELECTRICAL SPECIFICATIONS: AURAL SWEEP TEST SPECIFICATIONS: • Nominal Impedance: 8 Ohms • Driver Power Handling: 20W • Frequency Range (- 10 dB): Driver/Grille Assembly: 50 Hz - 17 kHz Installed in CSS-BB BACKCAN: 90 Hz - 17 kHz • Driver Sensitivity (mid-range) (1W [2.83V], 1m, 2k - 6k Hz):97 dB A.
PAGE 2
CSS8018 INSTALLATION INSTRUCTIONS Commercial Series Ceiling Speaker Tile Rails CSS-TR4/8 (x2) 1. Install according to diagram. 2. Connect leads according to Tap Wiring chart. 3. Cut off bare portion of unused leads and terminate with wire nuts. Note: Always install in accordance with applicable electrical and building codes. Back Can CSS-BB8 Back Can / Tile Rail screws (machine screws) M4 x 8 mm (4 places, packaged with back can) Install screw through thru-hole in back can, and screw into tile rail.