Project Everest DD66000 Owner's Manual

CHAPTER 13
The Project EVEREST DD66000 System Specifications
Low Frequency Driver : 380mm (15”) Pulp-Cone Woofer (1500AL) x 2
High Frequency Driver : 100mm (4”) Beryllium Compression Driver (435Be)
Ultra-High Frequency Driver : 25mm (1”) Beryllium Compression Driver (045Be)
Power Handling (RMS) : 500W
Frequency Response (-6dB) : 45Hz – 50kHz
Low Frequency Extension (-10dB) : 32Hz
Nominal Impedance : 8 ohms nominal
5.5 ohms @ 85Hz
3.5 ohms @ 40kHz
Sensitivity (2.83V@1m) : 96dB
Horn Directivity (horizontal x vertical) :
High Frequency : 100º x 60º
Ultra-High Frequency : 60º x 30º
Crossover Frequency : 150Hz (LLF LPF -6dB/oct)
700Hz (LF LPF -24dB/oct)
20kHz (UHF HPF -24dB/oct)
Control Function : HF Level Control (-0.5dB / 0dB / +0.5dB)
LF Level Control (Low / High)
LF / HF Drive Mode Switch (Normal / Bi-Amp)
System Orientation Switch (Left / Right)
Finish : Santos Rosewood (Black Leather Baffle / Gray Grille)
Cherry (Black Leather Baffle / Gray Grille)
Ebony (Black Leather Baffle / Gray Grille)
- Made-to-order
Maple (Cashmere Leather Baffle / Light Gray Grille)
- Made-to-order
Dimensions : 965mm (w) x 1,109mm (h) x 469mm (d)
(incl. feet , not spike, refer to figure16)
Weight : 137kg without grille
142kg with grille
Package Weight : 174kg