Quick Start Guide

QUICKSTART GUIDE

BATTERY POWERED | ONE HAND CARRY | BLUETOOTH AUDIO | LEGENDARY JBL SOUND

2. CHARGE THE UNIT

1. Conﬁrm the Power Switch (J) is in the

OFF position.

2. Connect the power cord to the Power

Receptacle on the rear of the speaker.

3. The Battery Level Meter (L) will

illuminate, indicating the unit is charging.

4. The unit is charged when the Battery

Level Meter (L) is fully illuminated when

powered on or of f.

1. LISTENING CONFIGURATIONS

Speaker Only 1 Spacer 2 Spacers

1 2

3. PLUG IN THE INPUTS

1. Turn the Channel Volume Controls (F)

and Master Volume Control (N) all the

way to the left before connecting any

inputs.

2. Connect your device(s) via the input jacks

provided.

3. If CH1 – CH4 inputs are being used,

select MIC or LINE via the Mic/Line

Button (E).

4. If connecting instruments directly to

inputs 3 – 4, engage the Hi-Z button (Q).

PAGE 1
BATTERY POWERED | ONE HAND CARRY | BLUETOOTH AUDIO | LEGENDARY JBL SOUND QUICKSTART GUIDE 1. LISTENING CONFIGURATIONS 1 2 3 Speaker Only 1 Spacer 2 Spacers 2. CHARGE THE UNIT 3. PLUG IN THE INPUTS 1. Confirm the Power Switch (J) is in the OFF position. 1. 2. Connect the power cord to the Power Receptacle on the rear of the speaker. Turn the Channel Volume Controls (F) and Master Volume Control (N) all the way to the left before connecting any inputs. 3.
PAGE 2
4. POWER ON THE UNIT 5. BLUETOOTH AUDIO 1. This device supports Bluetooth audio streaming. Flip on the Power Switch (J); the Power LED (K) and the Power LED on the front of the speaker will illuminate. To connect your device: 1. 6. SET OUTPUT LEVEL 1. Set the Channel Volume Controls (F) to12 o’clock. 2. Slowly turn the Master Volume Control (N) to the right until the desired volume is reached. 3. Fine tune the Channel Volume Controls (F) for the desired mix balance. 4.