EVO1.324 Loudspeaker User's Guide

EVOi.324

PAINTING

EVOi.324 is readily paintable. The SMC (Sheet Molded

Compound) provides a lightly textured surface that any

standard household or industrial paint readily adheres to.

The result is a sound reinforcement system that is able to

blend unobtrusively into the decor of its environment.

Instructions for Painting:

1. It is strongly recommended that EVOi.324 be partially

disassembled to obtain optimum results. This requires

removing the grill, the handle bar, and suspension point

placeholder screws.

A. Remove the grill screw covers by gently prying off.

B. Remove six grill retain screws.

C. Remove four allen head screws from the grill frame.

D. Remove the grill taking care to keep the grill and grill

supports together.

E. Remove all six suspension placeholder screws.

F. Remove the four allen screws retaining the handle bar

and remove the bar.

2. Prepare all surfaces by wiping off dust and cleaning with

a damp cloth. It may be necessary to use a mild household

cleaner to remove grease.

3. Carefully mask the aluminum electronics enclosure on

the back of the speaker. IT SHOULD NOT BE PAINTED.

Removal of the electronics enclosure should only be done

by qualified service personnel.

4. Carefully mask the baffle area. Avoid getting paint on the

loudspeaker cones or in the waveguide. It’s not a good

thing.

5. Apply as many coats of paint as is required. Standard

household or industrial paints (i. e. waterbased latex or

enamel) will provide the best results. Spraying many thin

coats will provide the best results.

6. Assemble the EVOi.324 in reverse order as described in

Step One.

Figure 24 - Exploded View for Painting