Owner's Manual

www.jbl.com
English
17
17
GX-A3001 INPUT CONNECTION
Use a "Y"-adapter to connect your source unit or processor's subwoofer line output to the ampli er's left and right inputs, as shown in the illustration
below. If your source unit does not have a dedicated subwoofer output you can connect the rear left/right outputs to the ampli er's left and right inputs.
"Y"-Adapter
L+L–R–R+
Source Unit
Subwoofer Output
See Set The Crossover Controls, on page 11, for information about setting the amplifier's controls.
To use the speaker-level inputs instead of the line-level inputs, see Using The Speaker-Level Inputs, on page 6.