EON ONE Compact A L L - I N- O NE R ECH ARG EABL E PERS O NAL PA USER’S GUIDE
Contents Section 1: Important Safety Instructions ���������������������������������������������������������� 2 Section 2: Precautions ���������������������������������������������������������������������������������������� 4 Section 3: EON ONE Compact System Declaration of Conformity ���������������� 5 Section 4: Introduction to the EON ONE Compact System ����������������������������� 6 Getting Started ����������������������������������������������������������������������������������������������������������
Section 1: Important Safety Instructions The EON ONE Compact system covered by this manual is not intended for use in high moisture environments. Moisture can damage the speaker cone and surround and cause corrosion of electrical contacts and metal parts. Avoid exposing the speakers to direct moisture. Keep speakers out of extended or intense direct sunlight. The driver suspension will prematurely dry out and finished surfaces my be degraded by long-term exposure to intense ultra-violet (UV) light.
1. READ these instructions. 2. KEEP these instructions. 3. HEED all warnings. 4. FOLLOW all instructions. 5. DO NOT use this apparatus near water. 6. CLEAN ONLY with dry cloth. 7. DO NOT block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. DO NOT install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9.
Section 2: Precautions WARNING: This product is intended to be operated ONLY from the voltages listed on the back panel. Operation from voltages other than those indicated may cause irreversible damage to the product and void the products warranty. The use of AC Plug Adapters is cautioned because it can allow the product to be plugged into voltages in which the product was not designed to operate. If you are unsure of the correct operational voltage, please contact your local distributor and/or retailer.
Section 3: EON ONE Compact System Declaration of Conformity WIRELESS TRANSMITTER COMPLIANCE INFORMATION: The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met. Le terme «IC:» avant le numéro de certification radio signifie seulement que les specifications techniques d’Industrie Canada ont été respectées.
Section 4: Introduction to the EON ONE Compact System Thank you for choosing the JBL EON ONE Compact. The EON ONE Compact is a battery-powered, ultraportable, all-in-one PA system featuring rechargeable battery power, Bluetooth® audio streaming and control, and a 4-channel mixer with individual tone controls, ducking, and reverb.
PA BASICS A mixing board is actually a very simple device that takes the audio input signals (from the input channels) and "mixes" them to the outputs. The mixing board controls will typically enable the user to blend the input channel signal levels, affect their tone, and adjust each channel's reverb level. The signal is then fed from the mixing board to the amplifiers and on to the speakers. The EON ONE Compact is a self-contained PA system, which includes a mixing board, amplifiers, and speakers.
AUDIO INPUTS The EON ONE Compact has four inputs: two mono MIC/LINE inputs on XLR combo jacks, one dedicated 1/4" HI-Z input for direct connection of an instrument (such as an acoustic guitar), and one 3.5mm AUX input, which is summed with the Bluetooth audio streaming input. All of the inputs are routed to the speaker, HEADPHONE jack, and PASS THRU output jack. If using a condenser microphone, MIC/LINE 1 must be used and phantom power must be enabled.
PHANTOM POWER DISCLAIMER When using condenser microphones, phantom power is required to be present at the contacts of the microphone (XLR) connector for the microphone to operate correctly. When phantom power is enabled in the EON ONE Compact, it is applied to the CH1 XLR MIC input only.
BLUETOOTH INPUT The EON ONE Compact comes equipped with the ability to stream Bluetooth audio for music playback or backing tracks. To connect a Bluetooth device, first enable Bluetooth on your device. Press and hold the BLUETOOTH button on the EON ONE Compact for ~3 seconds. The LED will blink when the EON ONE Compact is in pairing mode. Select "EON ONE Compact" from the source device to complete the pairing.
AUDIO OUTPUTS The EON ONE Compact provides a 1/4" PASS THRU output for connecting to additional EON ONE Compact loudspeakers. A 3.5mm (1/8") HEADPHONE output is also provided for additional monitoring options. PASS THRU output can be connected to the line input of another JBL EON ONE Compact to expand the system for monitoring or higher output capabilities USB POWER PORTS These ports can be used to charge a Bluetooth device or other portable music playback device during use.
REPLACING THE BATTERY 1. Unscrew the single screw on the battery compartment cover. 2. Pull the battery compartment cover off. 3. Remove the battery. 4. Replace with the same battery only. 5. Place the battery compartment over the battery and reapply screw.
Section 5: Downloading, Installing, & Using the App DOWNLOADING & INSTALLING THE APP 1. Visit www.jblpro.com/eon-one-compact, the iTunes store, or the Google Play store to download the app. 2. Follow the on-screen instructions to install the app. USING BLUETOOTH BROADCAST Follow these steps to connect a Bluetooth device for control, and to broadcast Bluetooth audio to up to four EON ONE Compact speakers. 1. Launch the JBL Compact Connect app. All EON ONE Compact speakers within range will appear. 2.
3. When the prompt appears, select BT BROADCAST. 4. Check the speaker(s) you wish to connect to.
5. Select the desired Listening Mode for each speaker to match the application. 6. A prompt will appear to indicate Bluetooth Broadcast has successfully connected. Click OK.
7. Select HOST for the speaker selected in step 2. The REMOTE option will automatically be selected for any remaining speakers. 8. A prompt will appear to indicate all speakers have been successfully associated. Click OK. 9. With the master gain set at a low level, start music playback from the connected Bluetooth device. 10. Slowly raise the MASTER GAIN until the desired volume is achieved.
HOME SCREEN Settings Menu: Accesses Bluetooth Broadcast and Demo Mode Locate: Flashes all lights on the speaker for easy identification Mixer: Accesses the input mixer of the speaker Link/Linked: Links and unlinks the speaker for bluetooth control Battery Level Indicator Master Fader: Controls the master volume of the system 17
INPUT MIXER SCREEN Mic/Line Switch Navigation Menu Bluetooth/Aux Input Selection Phantom Power On/Off Ducking On/Off Access Channel EQ Channel Sensor for Ducking Threshold: When ON, this channel will trigger music ducking; when OFF, this channel will not trigger music ducking Global Effects Bypass 18 Channel Gain Fader
FX SCREEN FX Sends: Dictates the amount of signal sent to the effects engine FX Name and On/Off Switch FX Bypass FX Controls: When a section is highlighted blue, it is the active section (sends will only reflect for blue highlighted sections) FX Return Level: Dictates the amount of effects that are sent back to the master fader 19
Section 6: Accessories BACKPACK The optional backpack is available for effortless transport of an EON ONE Compact system. MOUNTING STAND The JBLTRIPOD-GA tripod stand is available for securely mounting an EON ONE Compact system. Visit jblpro.com or contact your local JBL Pro dealer for more information on JBL accessories.
Section 7: System Specifications System System Type: Self-powered, two-way, 8” woofer, 1” tweeter Sensitivity (SPL): 112 dB Frequency Response: 37.
Section 8: Cables & Connectors XLR/F to XLR/M microphone cable The standard cable for interconnection of microphone and linelevel signals in professional audio systems. Example: Microphone to mixer. TRS (balanced) 1/4" phone to XLR/M cable For connecting balanced devices with 1/4" phone; may be used interchangeably. TRS (unbalanced) 1/4" phone to XLR/M cable For connecting instruments with unbalanced outputs to balanced XLR inputs.
Section 9: Contact Information Mailing Address: JBL Professional 8500 Balboa Blvd. Northridge, CA 91329 Shipping Address: JBL Professional 8500 Balboa Blvd., Dock 15 Northridge, CA 91329 (Do not return product to this address without first obtaining prior authorization from JBL) Customer Service: Monday through Friday 8:00am - 5:00pm Pacific Coast Time in the U.S.A. (800) 8JBLPRO (800.852.5776) www.jblproservice.com On The World Wide Web: www.jblpro.
Section 10: Warranty Information The JBL EON ONE Compact system is warranted for three years from the date of original purchase. Who Is Protected By This Warranty? Your JBL Warranty protects the original owner and all subsequent owners so long as: A.) Your JBL product has been purchased in the Continental United States, Hawaii or Alaska. (This Warranty does not apply to JBL products purchased elsewhere except for purchases by military outlets.
EON ONE Compact User's Guide Issued: 09/2019 The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Google Play is a trademark of Google LLC. iTunes is a trademark of Apple Inc., registered in the U.S. and other countries. Other trademarks and trade names are those of their respective owners.
