JBL WLI Owner's Manual Model Name: J BL-PRV170 Watertight Stereo Receiver built for the Outdoors With Built In Bluetooth Audio Streaming, AM/FM, USB input, Auxiliary Input, RF remote option, and 2 pairs of per-outs.
Product Description: This radio features state of the art Bluetooth technology allowing music to tirelessly stream from an audio source to the receiver you just purchased. Why Bluetooth? From a practical standpoint, Bluetooth enables your music device (if applicable) to be placed in a glove box, your overhead console, or even your pocket-places that are dry-without having to install a separate docking station.
wy ge Sat ‘Paella nt inn r Layout RR RON REE RE A) UBL To turn on the unit, press the JBL button. Once the unit is on, a quick press will MUTE the stereo Once the unit is on, a long hold (pressing down for 2 seconds) of the JBL button will turn the unit off. >i In radio mode, pressing this button results in switching between radio bands ie FM1, FM2, FM3, AM1, AM2. In USB and Bluetooth mode, short press ‘this button to Play/Pause the current track.
SCHNAPPS In USB mode, short press until display flickers, then use buttons to search a specific track. Long press MODELER button to accept and play. In Radio mode, a short press of the SCHNAPPS results in auto seek function; a long press results in APS (Auto Pre Set) function. MODELER A Short press of the MODE button switches among st Radio, USB, Bluetooth, Aux. Note: Mode USB will not show up unless a USB drive is inserted.
A.In radio mode, short press PH to access FM, AM, There are three FM bands and two AM bands each consisting of six presets. B.In radio mode, long press SCHNAPPS button and 18 of the strongest stations will be searched and automatically programmed into the preset memory. Press again quickly to stop the auto preset process. C.In radio mode, short press SCHNAPPS button to activate the scan function. D.
D. To skip to a specific track, press SCHNAPPS button until track number blinks, then use the VOL+ or Vol button down. After that, long press MODELER button to accept and play. A. Turn Bluetooth option on in your device. B. Long press the MODELER button on the stereo until "BT PAIR” appears. C. Long press the MODELER button again till "BT PAIRING”displays. D. Pick the “JBL PR-170" option on your Bluetooth enabled device (please note that if you are prompted for a password , the code entered will be (zero).
SAE Input Mode SR, SRE EER ER BR A. Press the Mode button until “AUX” appears on the LCD screen. B. The use of auxiliary mode allows you to play a portable music device through the headphone jack. A separate auxiliary adapter will enable you to do this (Prospect part, STEAMINESS. AE yi : RAIN, You will notice there is a 3.5mm female port located on the back of the unit, This port is for the plug in of our RF remote receiver (receiver and transmitter sold separately. Part, MILRF9-21).
A.To see time, long press Pll button. B.To set the clock, the following must be completed. Long press the button Pll , following this with another long press of Pll button. In doing so, the hour will flash, press to change the hour. Another short press of the Pll button will cause the minute to flash, press to change the minute.
r @87. 7mm Once a suitable location is determined, drill the hole and secure the stereo using the metal mounting bracket. If the bracket needs to be shortened, remove the appropriate number of the breakaway segments using a pair of pliers.
X.Wiring MU | GREEN PURPLE ~ REAR REAR LEFT GREEN/BLACK PURPLE/BLACK RIGHT WHITE GRAY FRONT + + FRONT LEFT BLACKWELL GRAY/BLACK RIGHT BLACK 3 — J.
i.Troubleshooting’ A. If the unit does not power up, consider the following tips: *Incorrect wiring Solution: Double check wiring making sure connections are firm *Fuse is blown Solution: Replace fuse *Voltage source is not sufficient Solution: Voltage must be between 11-13.6 Volts B. If no sound exists, consider: *Speaker connection came loose Solution: Double check connection *Bad speaker Solution: Replace bad speaker with known good speaker and connect *Output blown Solution: Send unit in for repair C.