User Manual

www.jbl.com
English
2121
10. SOFTWARE UPDATE
For optimal product performance and your best user experience,
JBL may offer software updates for the soundbar system in the
future. Please visit www.jbl.com or contact JBL call center to
receive more information about downloading update les.
Updating online
UPDATE FOUND
• On the soundbar, mount the two detachable speakers when
“ ” is displayed.
→ “
”: Software updating underway
→ “
”: Software updating completed
NOTES:
− For automatic online upgrading when update software is available,
make sure that the two detachable speakers have been docked onto
the soundbar.
Updating through a USB storage device
1. Check that you have saved the software update le to the root
directory of a USB storage device.
2. Check that you have docked the detachable speakers onto
the soundbar. Connect the USB device.
USB
3. To enter the software update mode, press and hold and - on
the soundbar for more than 10 seconds.
→ “
” is displayed.
→ “
”: Software updating underway
→ “
”: Software updating completed
→ The soundbar returns to the last selected source.
NOTES:
− Keep the soundbar powered on and the USB storage device mounted
before software updating is complete.
− ”
” is displayed if the two detachable
speakers are not properly mounted onto the soundbar.
− “
” is displayed if no USB storage device is detected,
and 5 minutes later, the soundbar exits the software update mode.
− “Error”is displayed if software updating has failed twice.