User Manual

2222
11. RE-CONNECT THE SUBWOOFER
The soundbar and subwoofer are paired at factories. After
power-on, they are paired and connected automatically. In some
special cases, you may need to pair them again.
POWER
POWER
4
2
3
1
To re-enter the subwoofer pairing mode
1. On the rear panel of subwoofer, press and hold until it turns
fast ashing white.
2. To enter the subwoofer pairing mode on the soundbar, press
and hold
on the remote control for more than ve seconds.
Press - on the remote control.
→ “
”: The subwoofer is ready for pairing.
→ “
”: The subwoofer is connected.
NOTES:
− The subwoofer will exit the pairing mode in three minutes if pairing and
connection are not completed.
turns from fast flashing white to
slow flashing white.
12. PRODUCT SPECIFICATIONS
General specication:
• Model: BAR 9.1 CNTR (soundbar unit),
BAR 9 .1 SURROUND (detachable speaker),
BAR 9.1 SUB (subwoofer unit)
• Sound system: 5.1.4 channel
• Power supply: 100 - 240V AC, ~ 50/60 Hz
• Lithium battery: 3.635 V, 3283 mA
h
• Total speaker power output (Max. @THD 1%): 820 W
• Soundbar output power (Max. @THD 1%): 400 W
• Surround speaker output power (Max. @THD 1%): 2 x 60 W
• Subwoofer output power (Max. @THD 1%): 300 W
• Soundbar transducer: 4 × racetrack drivers + 2 × up-ring
full-range drivers + 3 × 0.75” (20 mm) tweeter
• Surround transducer (per piece): up-ring full-range drivers +
0.75” (20 mm) tweeter
• Subwoofer transducer: 10”
• Operating temperature: 0°C - 45 °C
HDMI specication:
• HDMI Video input: 1
• HDMI Video output (with enhanced Audio Return Channel,
eARC): 1
• HDMI HDCP version: 2.3
Audio specication:
• Frequency response: 34 Hz - 20 KHz
• Audio inputs: 1 Optical, Bluetooth, USB (USB playback is available
in US version. For other versions, USB is for service only.)
USB specication (Audio playback is for US version only):
• USB port: Type A
• USB rating: 5 V
500 mA
• Supporting le format: MP3
• MP3 Codec: MPEG 1 Layer 2/3, MPEG 2 Layer 3,
MPEG 2.5 Layer 3
• MP3 sampling rate: 16 KHz - 48 KHz
• MP3 bitrate: 80 kbps - 320 kbps
Wireless specication:
• Bluetooth version: 4.2
• Bluetooth prole: A2DP V1.2, AVRCP V1.5
• Bluetooth frequency range: 2402 MHz - 2480 MHz
• Bluetooth Max. transmitting power: < 13 dBm (EIRP)
• Modulation Type: GFSK, π/4 DQPSK, 8DPSK
• Wi-Fi network: IEEE 802.11 a/b/g/n/ac (2.4GHz/5GHz)
• 2.4G Wi-Fi frequency range: 2412 – 2472 MHz (2.4GHz ISM
Band, USA 11 Channels, Europe and others 13 Channels)
• 2.4G Wi-Fi Max. transmitting power: 20 dBm (EIRP)
• Modulation Type: DBPSK, DQPSK, CCK, QPSK, BPSK,
16QAM, 64QAM