Owner's Manual

Gold-plated Binding Post
USING BARE WIRE OR PIN CONNECTORS:
IMPORTANT: Make sure that the(+) and(-) wires or pins do not
touch each other or the other terminal. Touching cables can cause a
short circuit that can damage your receiver or amplifier.
USING SPADE CONNECTORS:
IMPORTANT: Make sure the(+) and(-) spade connector blades do
not touch each other or the other terminal. Touching blades can cause a
short circuit that can damage your receiver or amplifier.
USING BANANA CONNECTORS:
Controls/Adjustments
A. Unscrew Cap
or Pin Connector
through Hole in Post
C. Tighten Cap
to Secure
A. Unscrew Cap B. Insert Space
A. Tighten Cap
Connector Blades
around Post
B. Insert Banana Connector
into Hole in Cap
NOTE: As with most speakers, the L52Classic has transducers whose
suspensions will take several weeks to "break in" and achieve optimum
performance. During this period, the balance between woofer and tweeter
may change, so we recommend that you adjust the tweeter controls
again after the break-in period.
© 2021 HARMAN International Industries, Incorporated. All rights reserved.
JBL is a trademark of HARMAN International Industries, Incorporated,
registered in the United States and/or other countries.
Features, specifications and appearance are subject to change without notice.
Part No.
950-0592-001 Rev. 1.1
-