Owners Manual
Table Of Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Federal Communication Commission Interference Statement
- For Products That Transmit RF Energy
- Exposure of humans to RF fields (RSS-102)
- For Products with Radio Receivers That Can Use an External Antenna (USA ONLY)
- FOR ALL EU COUNTRIES
- For Products that includes Batteries
- For All Products Except Those with Wireless Operation
- For All Products with Wireless Operation
- 1. INTRODUCTION
- 2. WHAT’S IN THE BOX
- 3. PRODUCT OVERVIEW
- 4. PLACEMENT
- 5. POWER ON
- 6. CHARGING (PartyBox 300 only)
- 7. USING YOUR PARTYBOX
- 8. CARRYING YOUR PARTYBOX
- 9. SETTINGS
- 10. SPECIFICATIONS
- 11. TROUBLESHOOTINGS
- 12. COMPLIANCE
- 13. TRADEMARK
88
4. PLACEMENT
Notes:
– For the best quality sound, ensure the two tweeters are placed on
the upper side of the speaker box.
– Do not sit on the speaker or push it. Otherwise, it may result in
malfunction and causing personal injury and /or property damage.
Place the speaker on a at, stable surface and make sure that the
rubber feet side is down. You can place the speaker vertically or
horizontally. It automatically optimizes sound to adapt to placing
orientation.
a
b
Vertical Horizontal
5. POWER ON
Cautions:
– Use only provided power cord.
– For PartyBox 300, either AC/DC power or built-in battery can be
used as a power supply.
1. Plug one end of the AC power cord into the power connector
on the back of the speaker, then plug the other end to a wall
outlet.
2. Connect the car charger to the DC power jack of the speaker,
and then to your vehicle’s car charger outlet.