UBL L , __ _ _ _ _ _ _ ____.
Table of Contents Table of Contents ----------------------------------------------------------------- 1 Product Description -------------------------------------------------------------- 2 Installation Instructions ---------------------------------------------------------- 3 Wiring Configuration ------------------------------------------------------------ 4 General Function of Buttons ---------------------------------------------------- 5 Sign up Display & Home Menu ----------------------------------------
Product Description This radio is another forward thinking product from JBL. Other Harman brands include Infinity by Harman, JBL Professional, AK.G, Mark Levinson, Harman Kardon, and Revel. Prospec Electronics is Harman's exclusive distributor to OEM's in the marine, side by side, golf car, and hot tub industries. Our products range from mechless receivers, amplifiers, subwoofers, speakers, and other accessories. Prospec is located in Mount Pleasant, S.C., a stone's throw away from Charleston, S.C.
Installation A mounting gasket has been added inside the package for convenience. Trace along the outside edge of the gasket thus revealing your cutout. Mounting Illustration ---- \~ II I 1. Avoid installing stereo below cupholders! Make sure mounting substrate is flat to avoid flexing of the plastic. 2. Use the back bracket and 3. To avoid possible water studs to affix the unit.
Wire Configuration RED 6P REMOTE CONTROL (FRONT LINE OUT) WHITE RED (REAR LINE OUT) WHITE (ANT JACK) [==][Illlill-_j RED (AUX) WHITE PINK ( REAR CAMERA DET ) - - - - - - - - _ _ , (ILL) _ _O_RA_NG_E_ _ _ _~ (REAR CAMERA) 12P CONNECTOR (USB) (REM) ------==---_B_L_U_E___. (ACC) RED RED WHITE (GROUND)------B_LA_C_K____. ( FRONT LEFT ) ( REAR LEFT) WHITE GRAY WHITE/BLACK GRAY/BLACK GREEN VIOLET GREEN/BLACK VIOLET/BLACK (SUBWOOFER) (FRONT RIGHT) ( REAR RIGHT) NOTE: 1.
General Function of Buttons G)----- ® ® 1. POWER, SRC button - With unit off, press to power the unit on. - With the unit on, press and hold for over 2s to power the unit off. - Press SRC button to switch modes among FM/ AM/WB/ BT/ USB/ AUX. 2. Pause, Mute button - In Radio (FM/AM/WB), AUX playing mode, press it to MUTE sound output, press it again to resume sound output. - In BT Music source playing, press it to PAUSE playback, press it again to resume playback.
Sign Up Display & Home Menu 1. Sign up Once the unit powers on, the introductory home screen appears for 5 seconds, then switches to the last played mode before power off occurred. re;-, ~ Push ► 2. Home Screen (source display) At Home Screen, turn VOL knob to move to desired source and press ENTER button to enter the desired source.
General Operations 1. General Settings At Home Screen, tum VOL knob and press it to enter Setup, then tum VOL knob to move among sub-features, press the knob at desired feature and tum the knob again to adjust the level. Press the knob again to exist current feature adjustment. Note: Ifno operation occurs, it will revert back to source playing screen after 5s. r·· 1 Sub Freq > : Sub Woofer Brightness Radio Area Soft Version Soft Reset MCU Update I-Volume 120Hz 16 5 USA 1-1.
General Settings 1-8. I-Volume Control In Settings screen, turn VOL knob and press the knob when it highlights at I-Volume. Then turn the knob to adjust I-VOL from Oto 40. Press the knob again to exit I-Volume control. Note: The I-Volume determines the volume level when the unit is powered on. 1-9. Rear Camera Control With Rear Camera connected, once triggered, it will change to Camera display. You can select Camera OFF in Settings.
Radio Section Operation 1. To Select Radio mode At Home Screen, turn VOL knob and press it to select AM, FM or WB source. (The foreground pop up icon refers to the source changing.) Or repeat press SRC button to select the desired source. < > 2. Radio Screen Description Displays EUR, USA or JAPAN to indicate the Area selected in the Settings. Only displays when EQ / LOUD ON was selected in the Settings. Displays FM, AM,WB. Only shows when the station is a Stereo Channel.
Radio Section Operation 3. Auto Tuning In AM, FM, WB playing mode, simply press ..,.. or ..,.. button to activate auto tune. This results in automatically stopping at next station of sufficient signal strength. 4. Manual Tuning In AM, FM, WB playing mode, long press ..,.. or ..,.. button for 2s. This will activate manual tune with MANU display on the top area. Then repeatedly press ..,.. or ..,.. button to tune frequency by steps. NOTE: Radio will revert back to AUTO tune mode after 5s without operation. 5.
Bluetooth Section Operation 1. To Select Bluetooth mode At Home Screen, tum VOL knob and press it to select BT source. (The foreground pop up icon refers to the source changing.) Or simply repeat press SRC button to select the desired source. > 2. Bluetooth Screen Description Only displays when EQ / LOUD ON was selected in the Settings. T , + 40 O Classic , 0001~~ ID3 tag: Song Title Artist Album '!> ►-- ~. 3.
Bluetooth Section Operation 4. Play/Pause Play Once the BT device is paired successfully, music will begin to play. Note: For some Bluetooth enabled phones, you may need to activate play from your phone first. It depends on the phone itself. While BT Music is playing, press the PAUSE button to pause the playback, and press it again to resume playback. Note: 11 refers to PLAY; ► refers to PAUSE. 5.
USB Section Operation 1. To Select USB mode At Home Screen, turn VOL knob and press it to select USB source. (The foreground pop up icon refers to the source changing.) Or repeat press SRC button to select the desired source. Note: This input is designed to read and play USB drives (mp3 and wma files), not media. < > 2. USB Screen Description Only displays when EQ / LOUD ON was selected in the Settings. use [ Track No.IFolder No. -~ I+ Classic Bl ~ 0001~~-:.::.-. .. .
USB Section Operation 4. Track Up/Down While USB is playing, press ...,.. button to select next track and press ..,.. button to select the previous track. To fast forward , press and hold ...,.. button. To fast rewind, press and hold ..,.. button. 5. Repeat/ Random/ Scan Play While USB is playing, repeatedly long press MENU button to switch among Repeat One, Repeat All, or Random play. Long press MUTE button to switch to Scan play. Long press MUTE again to disable Scan function. 6.
AUX Section Operation 1. To Select AUX mode At Home Screen, turn VOL knob and press to select AUX source. (The foreground pop up icon refers to the source changing.) Or repeat press SRC button to select the desired source .... < -> The use of auxiliary mode allows you to play the portable music device through the headphone jack. Note: An additional accessory/adaptor must be purchased in order for this to happen. Prospec's part, SEAMINI2 or SEAUSBMINI36 fulfills this option.
Troubleshooting *Note: In many respects, a stereo acts much like a computer and occasionally requires a reboot. In the unlikely event of product malfunction, a reset can usually fix the issue. For software reset operation, please refer to page 7. Issue Cause Solution No power 1. Incorrect wiring 2. Fuse is blown 3. Low battery voltage 1. Double check wiring 2. Replace fuse 3. Check voltage of vehicle battery with multimeter. Voltage must be at least 11 V. No Sound 1. Speaker connection came loose 2.
