UDli I 1 ''f/2 'i , 'if� f!J ---"f ,__ ; (Note: The front of the stereo should be cleaned with a sponge and water. Do not use a pressure washer to clean the faceplate.
Troubleshooting Table of Contents *Note: In many respects, a stereo acts much like a computer and occasionally requires a reboot. In the unlikely event of product malfunction, a reset can usually fix the issue. For software reset operation, please refer to page 7. Issue Cause Solution No power 1. Incorrect wiring 2. Fuse is blown 3. Low battery voltage 1. Double check wiring 2. Replace fuse 3. Check voltage of vehicle battery with multimeter. Voltage must be at least 11V. No Sound 1.
Product Description AUX Section Operation This radio is another forward thinking product from JBL. Other Harman brands include Infinity by Harman, JBL Professional, AKG, Mark Levinson, Harman Kardon, and Revel. Prospec Electronics is Harman’s exclusive distributor to OEM’s in the marine, side by side, golf car, and hot tub industries .Our products range from mechless receivers, amplifiers, subwoofers, speakers, and other accessories. Prospec is located in Mount Pleasant, S.C.
对折基准线 USB Section Operation Installation 4. Track Up/Down While USB is playing, simply press button to select next track and press button to select the previous track. To fast forward , press and hold button. To fast rewind, press and hold button. A mounting gasket has been added inside the package for convenience. Trace along the outside edge of the gasket thus revealing your cutout. Mounting Illustration 5.
Wire Configuration USB Section Operation 1. To Select USB mode At Home Screen, turn VOL knob and press it to select USB source. (The bigger pop up icon refers to the source changing.) Or simply repeat press SRC button to select the desired source. Note: This input is designed to read and play USB drives (mp3 and wma files), not media.
对折基准线 General Function of Buttons Bluetooth Section Operation 4. Play/Pause Play Once the BT device is paired successfully, music will begin to play. Note: For some Bluetooth enabled phones, you may need to activate play from your phone first. It depends on the phone itself. While BT Music is playing, press the PAUSE button to pause the playback, and press it again to resume playback. Note: refers to PLAY; refers to PAUSE. 1 2 5.
Sign Up Display & Home Menu Bluetooth Section Operation 1. Sign up 1. To Select Bluetooth mode At Home Screen, turn VOL knob and press it to select BT source. (The foreground pop up icon refers to the source changing.) Or simply repeat press SRC button to select the desired source. Once the unit powers on, the introductory home screen appears for 5 seconds, then switches to the last played mode before power off occurred. SRC Push 2. Home Screen (source display) 2.
对折基准线 Radio Section Operation General Operations 3. Auto Tuning In AM, FM, WB playing mode, simply press or button to activate auto tune. This results in automatically stopping at next station of sufficient signal strength. 1. General Settings At Home Screen, turn VOL knob and press it to enter Setup, then turn VOL knob to move amongst sub-features. Press the knob at desired feature and turn the knob again to adjust level. Press the knob again to exit current feature adjustment.
对折基准线 General Settings Radio Section Operation 1-8. I-Volume Control In Settings screen, turn VOL knob and press the knob when it highlights at I-Volume. Then turn the knob to adjust I-VOL from 0 to 40. Press the knob again to exit I-Volume control. Note: The I-Volume determines the volume level when the unit is powered on. 1. To Select Radio mode At Home Screen, turn VOL knob and press it to select AM, FM or WB source. (The bigger pop up icon refers to the source changing.
