ONE OWNER’S MANUAL
TABLE OF CONTENTS INTRODUCTION............................................................................................................ 1 WHAT’S IN THE BOX...................................................................................................... 2 PRODUCT OVERVIEW .................................................................................................. 3 Controls on headset................................................................................................................
Introduction Congratulations on your purchase! This manual includes information on the JBL QUANTUMONE gaming headset. We encourage you to take a few minutes to read this manual, which describes the product and includes step-by-step instructions to help you to set up and get started. Read and understand all the safety instructions before using your product. If you have any questions about this product or its operation, please contact your retailer or customer service, or visit us at www.JBLQuantum.
What’s in the box 06 01 02 03 04 01 JBL QUANTUMONE headset 02 3.
PRODUCT OVERVIEW Controls on headset 01 02 03 04 05 06 07 08 12 09 10 11 01 ANC* / TalkThru** LED • Lights up when the ANC feature is enabled. • Flashes quickly when the TalkThru feature is enabled. 02 button • Press briefly to turn ANC on or off. • Hold for more than 2 seconds to turn TalkThru on or off.
05 Volume +/- dial • Adjusts headset volume. 06 RGB Lighting Zones 07 button • Press to mute or unmute the microphone. • Hold for more than 5 seconds to turn the RGB light on or off. 08 Power status LED • Lights up when the USB connection is active. 09 USB-C port 10 3.5mm audio jack 11 Boom / Calibration Microphone jack 12 Mic mute / unmute LED • Lights up when the microphone is muted. * ANC (Active Noise Cancelling): Experience total immersion while gaming by suppressing the outside noise.
Controls on USB cable 01 02 01 / • dial Balances the chat volume in relation to the game audio volume. 02 Power status LED • Lights up when the USB connection is active.
Controls on 3.5mm audio cable 01 02 01 Volume dial • 02 Adjusts headset volume in 3.5mm audio connection. slider • Slide to mute or unmute the microphone in 3.5mm audio connection.
Getting started Wearing your headset 1. Attach the detachable boom microphone. 2. Put the side marked L onto your left ear and the side marked R onto your right ear. 3. Adjust the earpads and headband for a comfortable fit. 4. Adjust the microphone as necessary.
First-time setup (for PC only) Download JBL QuantumENGINE from jblquantum.com/engine to gain full access to features on your JBL Quantum headset - from headset calibration to adjusting 3D audio to suit your hearing, from creating customized RGB lighting effects to determining how the boom microphone side-tone works. Software requirements Platform: Windows 7 / Windows 10 (64 bit) only 500MB of free hard drive space for installation TIP: • QuantumSPHERE 360 and DTS Headphone:X V2.
7. Follow the onscreen instructions to personalize your sound settings. JBL QuantumONE Game JBL QuantumONE Chat Personalized audio calibration 01 02 15-30 sec 1. Connect the headset to your PC via USB connection (See “With USB connection”). 2. Run JBL QuantumENGINE and go to QuantumSPHERE 360 calibration.
3. As instructed, detach the boom microphone and plug in the calibration microphone. 4. Place the calibration microphone inside your left ear and wait until proper noise level is detected. 5. Follow the onscreen instructions to finish audio calibration for both ears. 6. Detach the calibration microphone and plug back the boom microphone.
Re-centering This function allows you to re-center your headset before every use to get the optimal sound positioning. 1. Position yourself in front of your monitor. 2. Press on your headset and the head-tracking sensor will start automatic calibration. TIP: • You can also trigger this function from JBL QuantumENGINE.
Using your headset With USB connection * 1. Connect the orange connector (USB-A) of the USB cable to a USB-A port on your PC, Mac or PS4. 2. Connect the black connector (USB-C) to the USB-C port on your headset. Basic operation Controls Operation Volume dial Adjust master volume. button button Press to mute or unmute the microphone. Hold for more than 5 seconds to turn on or off the RGB light. Press briefly to turn ANC on or off. Hold for more than 2 seconds to turn TalkThru on or off.
TIP: • Depending on your device configuration, you can also use a USB-C to USB-C cable (not supplied). USB-C connectivity with all devices is not guaranteed. With 3.5mm audio connection 1. Connect the black connector to your headset. 2. Connect the orange connector to the 3.5mm headphone jack on your PC, Mac, mobile or gaming console device. Basic operation Controls Operation Volume dial on 3.5mm audio cable Adjust master volume. slider on 3.5mm audio cable Slide to mute or unmute the microphone.
Product Specifications • Driver size: 50 mm Dynamic drivers • Frequency response: 20 Hz - 40 kHz • Microphone frequency response: 100 Hz -10 kHz • Max input power: 20 mW • Sensitivity: 95 dB @ 1 kHz, 1 mW • Maximum SPL: 97 dB • Microphone sensitivity: -41 dBV @1 kHz / Pa • Impedance: 32 Ohm • Microphone pickup pattern: Unidirectional • Microphone size: 6 mm x 2.7 mm • Weight: 369 g NOTE: • Technical specifications are subject to change without prior notice.
Troubleshooting If you have problems using this product, check the following points before you request service. No sound or poor sound • Make sure you have chosen JBL QUANTUMONE GAME as the default device in the game sound settings of your PC, Mac or gaming console device. • Adjust volume on your PC, Mac or gaming console device. • Check game chat balance on PC if you are only playing game or chat audio. • Check that ANC is enabled while TalkThru is disabled.
HP_JBL_QONE_OM_V5
