Owner's Manual

Club 625SQ
2x Speakers
2x Grilles
1x Foam gasket
16x Screws
8x Speed clips
2x Plastic multi-hole adapter rings
2x JBL logo badge
Club 605CSQ
2x Speakers
2x Grilles
2x Plastic multi-hole adapter rings
1x Foam gasket
2x Crossovers
2x Tweeters
2x Flush-mount cups
2x Threaded flush-mount adapters
2x Surface-mount cups
2x Starfish tweeter mounts
2x Plastics locking nuts
30x Screws
8x Speed clips
2x Spacers
2x Washers
2x JBL logo badge
Features and Benefits
Carbon Fiber Woofer with Plus One
™
Architecture for Ultimate
Sound Quality
Patented (US patent #7,548,631) Plus One
™
cones provide more overall
speaker-cone area than other speakers for the same size, which bring the
louder bass. While the high-end carbon fiber woofer material provide the
accuracy and clear musical character.
Edge-driven Silk Dome Tweeter
Club SQ speakers have edge-driven silk dome tweeter, which delivers a broader
and smoother high frequency response, never-harsh regardless of output level
than more commonly used w-domes.
Adjustable Tweeter Output Level
The Club SQ Speakers offer a tweeter output level control of 0dB or +3dB to
optimize system linearity based on installation location.
Incredibly Y40 Ferrite Magnet for higher sensitivity
The Club SQ Speakers use the Y40 Ferrite Magnet, which can bring higher
sensitivity compared with the commonly Y30 Ferrite magnet.
Starfish
™
Tweeter Mounting Adapter
The Club 605CSQ component Speaker system come with the Starfish
™
tweeter mounting adapter. The Starfish tweeter mounting adapter allows for
easy installation of the tweeter behind factory grilles and in locations such an
A-Pillar. It also provides six break-off mounting tabs to accommodate many
mounting configurations. The tweeter can be surface- or flush-mounted.
The tweeter can be easily serviced, and doesn’t require removing the whole
assembly.
I-Mount Tweeter Mounting Kit
The I-Mount
™
(patent no. 5,859,917) tweeter-mounting system allows easy and
versatile installation of tweeters in each of the component systems. It includes
a flush cup and surface-mount mounting hardware. With a 1-3/4" cutout and a
1" mounting depth, installation becomes a snap. This allows the tweeter to be
flush-mounted and can be angled up to ±40 degrees. Locknuts are included to
keep everything in place, and the tweeter can be replaced without removing the
whole assembly.
What’s in the Box
Technical Specifications
Club 625SQ
6-1/2" (160mm) 2-way Car Speaker,
Engineered for Ultimate Sound Quality
Power Handling: 75W RMS, 225W peak
Sensitivity (@ 2.83V): 93dB
Frequency Response: 48Hz – 21kHz
Nominal Impedance: 3.0 ohms
Club 605CSQ
6-1/2" (160mm) 2-way Component Speaker System,
Engineered for Ultimate Sound Quality
Power Handling: 95W RMS, 285W peak
Sensitivity (@ 2.83V): 93dB
Frequency Response: 48Hz – 21kHz
Nominal Impedance: 3.0 ohms
HARMAN International Industries, Incorporated
8500 Balboa Boulevard, Northridge, CA 91329 USA
www.jbl.com
© 2020 HARMAN International Industries, Incorporated. All rights reserved. JBL is a trademark of
HARMAN International Industries, Incorporated, registered in the United States and/or other countries.
Features, specifications and appearance are subject to change without notice.
Newly engineered JBL Club SQ speaker are target to get the ultimate sound quality