Owners Manual

5
* Note: Please take into consideration your particular setup and cable
arrangement when deciding on mounting your M-Patch with the highest degree
of angle in relation to your desktop surface. You will need to ensure that you
have enough space to connect your cables!
If you would like to rack-mount the M-Patch 2, simply connect the supplied
rack/ stand ears to each side of the M-Patch 2 using the included screws.
This allows you to rack-mount the unit in a standard 19” professional rack.
PLACEMENT
The JBL M-Patch 2 has an electronic circuitry inside as well as isolation
transformers. Be sure that there is enough air space around the unit for cooling.
To avoid overheating, please do not place the units on top of high temperature
devices such as power ampliers or in close proximity to devices that transmit
or receive radio frequencies.
CONNECTIONS
The M-Patch 2 features two (2) separate input channels named “Aux” &
“Stereo”. The connections are found on the rear panel. (Input section on rear
panel of M-Patch 2).
* Note: The M-Patch 2 accepts mic or line level input signals. Do not connect
your power amplifier outputs to the M-Patch 2 inputs!
Rack-mount conguration
M-Patch 2 Rear Panel
PASSIVE VOLUME CONTROL
MONITOR SWITCH
PASSIVE VOLUME CONTROL
MONITOR SWITCH