JBL ON STAGE 400iD ™* High-performance Speaker dock for iPod iPod touch not included.
Important Safety Instructions Please read the following precautions before use: • • • • • • • • • • • • • • • • • • • • Read these instructions, heed all warnings and keep for future reference. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings; a minimum distance of 10mm around the entire apparatus is required for sufficient ventilation. No naked flame sources, such as lighted candles, should be placed on or near the apparatus.
FCC STATEMENT AND WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
JBL ON STAGE™* 400ID HIGH-PERFORMANCE SPEAKER DOCK FOR iPod The JBL On Stage 400ID high-performance speaker dock is the latest JBL innovation. As a longtime leader in the manufacturing of high-end, professional component audio systems, we boast an audio heritage, combined with continual research, that has provided the unique technologies built into the JBL On Stage 400ID system. This complete iPod docking sound system is the new centerpoint of your personal entertainment space.
Unpacking your jbl On Stage 400iD Carefully unpack your speaker system and identify all its components: JBL MENU JBL On Stage 400ID Adapters for iPod IR remote Power supply Audio cable Quick setup instructions • Plug the barrel end of the power supply cord into the power jack and plug the other end into the wall. • Next, push the power switch; a green LED will light up, indicating that the unit is powered. • Find the correct adapter for your iPod, then firmly place it into the docking area shown.
SPECIFICATIONS troubleshooting JBL On Stage 400 iD Frequency Response: 40Hz – 20kHz Power Consumption: 55 Watts maximum JBL On Stage 400ID Transducers: One Atlas™ (45mm) neodymium and four Odyssey® (25mm) SOUND QUALITY Symptom Possible Problem Solution Note No sound from the JBL On Stage 400ID unit No power to the unit Make sure the wall power outlet or power strip has power. Make sure all switches for the outlet/power strip are on and that all switches for the speaker system are on.
troubleshooting CHARGING AND SYNCING Symptom Possible Problem Solution iPod will not charge Wrong adapter is used Make sure correct adapter is used for your specific iPod model. The iPod is not making full contact with the docking station Make sure the iPod is seated securely into the docking station. Third-party accessories may be conflicting with the USB signal Make sure you do not have the JBL On Stage 400ID unit connected to a USB hub; connect the unit directly into the computer’s USB port.
JBL and Odyssey are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries. Atlas is a trademark of Harman International Industries, Incorporated. * The trademark On Stage is used with permission of OSA International, Inc. iPod is a trademark of Apple Inc., registered in the U.S. and other countries. Shuffle is a trademark of Apple Inc.
