User guide

77
troubleshooting your JBL On Stage IIIP
If you have any questions or need further assistance, please visit www.jbl.com.
Features, specifi cations and appearance are subject to change without notice.
No sound from the JBL
On Stage IIIP speaker
system.
Technical Specifi cations
Frequency Response:
70Hz – 20kHz
Power Consumption:
20W Maximum
Power Input:
12V/1.5A
JBL On Stage IIIP Transducer:
(4) 1
"
Full range per channel
Dimensions:
Diameter – 7 1/2
"
(190mm)
Height – 2
"
(51mm)
System Weight:
1.12 lb (0.51kg)
Battery:
Size – AA
Type – Alkaline, NiMh
DO NOT MIX BATTERY TYPES.
DO NOT MIX CHARGED AND
PARTIALLY CHARGED BATTERIES.
BATTERIES WILL NOT RECHARGE
WHILE IN JBL ON STAGE IIIP.
Ensure that the power supply is connected to a live
power source and properly connected to the JBL
On Stage IIIP. Note: When the JBL On Stage IIIP is
powered, a green power LED on the JBL On Stage IIIP
should light up.
Touch the volume “Up” (+) pad on the volume control
to unmute and/or increase the system volume level.
Note: Touching the volume “Down” (–) pad lowers
the system volume. Touching both the (+) and (–)
volume control pads at the same time will mute the
system.
Increase the volume level on the audio source device.
Replace the batteries.
Press the Play button on the iPod or remote control.
No power to the system.
Power adapter plug is not
inserted correctly.
No volume or low volume.
Input source volume is low.
Low or drained batteries.
iPod is paused.
Sound Quality
Symptom Possible Problem Solution
0066CSK - JBL On Stage IIIP UG.indd 70066CSK - JBL On Stage IIIP UG.indd 7 16/09/08 10:49:3116/09/08 10:49:31