Operation Manual

12
8. CARRYING YOUR PARTYBOX
Cautions:
– Before carrying the speaker, make sure that all the cords are
disconnected.
– To avoid personal injury and/or property damage, hold the product
rmly while carrying.
9. SETTINGS
9.1 TWS Mode
The two PartyBox speakers can connect to each other in TWS
mode.
1. Press and hold on both speakers simultaneously for 5
seconds, TWS connection will be built up. By default, the
speaker which connected to your smartphone is the master
speaker (L channel), the other one is the slave speaker (R
channel).
2. Press L/R button on one speaker to toggle between L
channel / R channel / Stereo, another speaker will change
the setting automatically.
3. In TWS mode, press and hold for 5 seconds on either
speaker or power off the speaker to exit the TWS mode.
10m (30”)
9.2 Demo Mode
Cautions:
– If you plugged out the AC power (PartyBox 300 only), then you
plugged it in, the Demo Mode will be resumed automatically.
– Ensure PartyBox is powered by AC to go into Demo Mode.
To enter or to exit demo mode, press and hold and
simultaneously for 5 seconds.
In demo mode, all the input sources are disabled, all buttons but
/ / / are disabled.
Note:
– The PartyBox built-in with 3 x 30 seconds music tracks.
Playback
• Press once to start, pause or resume play.
• Press once after the pause, to play the next track.
9.3 Standby Mode
The product will enter into sleep mode after 20 minutes without
operation.
• If the“PartyBox” powered by the battery, it will auto power off
if no action for 20 minutes.
• If the “PartyBox” powered by AC or DC power source, the
product will enter standby mode if no action for 20 minutes.
Press (power) or Bluetooth stream break-in in standby mode,
the speaker will enter normal mode.