Operation Manual

13
www.jbl.com
English
10. SPECIFICATIONS
Product name PartyBox 300 PartyBox 200
AC power input 100-240V ~ 50/60Hz
DC power input 12V 8A
Built-in battery Li-ion 10.4Ah, 7.2V N/A
Power consumption 60W
Standby power
consumption
<2W with BT connecting; <0.5W
without BT connecting
USB output 5V 2.1A
Speaker drivers 2 woofer + 3 tweeter
Speaker impedance 4 ohm
Total output power 120 W RMS
Signal-to-noise (S/N)
ratio 65 dBA
Frequency response 45 Hz - 18 KHz (-6dB)
Bluetooth version 4.2
Bluetooth prole A2DP, AVRCP
Bluetooth transmitter
frequency range 2402 - 2480 MHz
Bluetooth maximum
transmitter power 8dBm (EIRP)
Bluetooth transmitter
modulation GFSK, π/4 DQPSK, 8DPSK
Bluetooth range Approx. 10 m (33 feet)
USB format FAT16, FAT32
USB le format .mp3, .wma, .wav
Input sensitivity • AUX in: 500mV rms (RCA
connector); 250 mV rms
(3.5mm connector).
• Digital input:
Bluetooth/USB -12dBFS
Dimension (W x H x D) 330 x 688 x 323 mm /
13 x 27 x 12.7 in
Net weight 15.84 kg 15.32 kg
11. TROUBLESHOOTINGS
Caution:
– Never try to repair the product by yourself. If you have any
problems while using this product, check the following points
before you request service.
System
The unit will not turn on.
• Check if the power cord is plugged into the outlet and to the
PartyBox.
• For “PartyBox 300” make sure the speaker is fully charged,
if not use the power cord to turn on your speaker.
Sound
No sound from the PartyBox.
• Make sure that the PartyBox is powered on.
• Make sure that volume level is turned to an audible level.
• Make sure that it is connected to a music source.
Bluetooth
A device cannot connect with the PartyBox.
• Check if you enable the Bluetooth function of the device.
• The PartyBox is already connected to another Bluetooth
device. Press and hold on Bluetooth to disconnect and pair
with a new device.
Poor audio quality from a connected Bluetooth device.
• The Bluetooth reception is poor. Move the device closer to
the PartyBox, or remove any obstacle between the device
and the PartyBox.