Brochure

PD5322/95
Specifications:
Frequency Range
1
(-10 dB): 41 Hz to 17 kHz
Frequency Response
1
(±3 dB): 49 Hz to 15 kHz
Coverage Pattern: 90° x 50°
Directivity Factor (Q): 10.5
Directivity Index (DI): 10.2 dB
Crossover Modes: Tri-amp/Bi-amp (passive mid-high) switchable
Passive Crossover
2
: 6th order (36 dB/oct) Linkwitz-Riley HP & LP, 1.5 kHz
Transducer Power Ratings LF: 1600 W (6400 W peak)
, 2 hrs. 1200 W (4800 W peak), 100 hrs
(AES)
3
: MF: 350 W (1400 W peak), 100 hrs
HF: 75 W (300 W peak), 2 hrs
Long-Term System Power Bi-amplified Passive Mode: LF: 1200 W (4800 W peak)
Rating (IEC)
4
: Bi-amplified Passive Mode: M/HF: 300 W (1200 W peak), 100 hrs
Maximum SPL
5
:Tri-amp mode: LF: 128 dB-SPL cont avg (134 dB peak)
MF: 134 dB-SPL cont avg (140 dB peak)
HF: 133 dB-SPL cont avg (139 dB peak)
Passive mode: 134 dB-SPL cont avg (140 dB peak)
System Sensitivity
6
(1W @ 1m): Passive Mode: 109 dB-SPL (mid/high section only)
Transducers:
Low Fr
equency Driver: 2 x 2206H 300 mm (12 in) driver with 100 mm (4 in) voice coil
Nominal Impedance: 4 ohms (2 x 8 ohms, internally wired in parallel)
Sensitivity
6
(1W, 1m): 96 dB-SPL
Mid Fr
equency Driver: CMCD-82H cone midrange compression driver with intergral 200 mm (8 in)
Differential Drive
®
dual 75 mm (3 in) voice coil driver
Nominal Impedance: 8 ohms
Sensitivity
6
(1W @ 1m): 109 dB-SPL
High Frequency Driver: 2431H, 38 mm (1.5 in) exit compression driver with 75 mm (3 in) voice coil
Nominal Impedance: 8 ohms
Sensitivity
6
(1W @ 1m): 114 dB-SPL
W
aveguides: MF: PT-N95MF 600 x 600 mm (24 x 24 in)
HF: PT-H95HF 300 x 300 mm (12 x 12 in)
Physical:
Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade
11-ply Finnish birch plywood.
Suspension Attachment: 20 points (5 top, 5 bottom, 4 each side, 2 rear), M10 threaded hardware
(eyebolts NOT included, see optional accessories).
Finish: Black DuraFlex™ finish. White (-WH) available upon request.
Optional Weather Resistant WRC for outdoor placement where the loudspeaker will be sheltered
Versions: from direct exposure to the elements. WRX for direct exposure or
extreme environments, such as tropical or beach, or in areas with salt air,
extreme high humidity or rapid changes in temperature. See WRC/WRX
configuration sheet for details.
Grille: Powder coated 14 gauge perforated steel, zinc-phosphate dipped, foam
backing (grille cloth backing on white units)
Input Connectors: Neutrik Speakon
®
NL8, plus CE-compliant covered barrier strip terminals.
Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width
9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-
through.
Environmental Specifications: Mil-Std 810; IP-x3 per IEC529. For higher environmental ratings, use WRC
or WRX.
Dimensions 991 x 673 x 706 mm
(H x W x D in vertical orientation): (39.0 x 26.5 x 27.8 in)
Net Weight: 77 kg (170 lb)
Optional Accessories: 229-00009-01 kit of three M10 x 35 mm forged shoulder steel eyebolts.
1.
In bi-amp mode, with recommended active tuning.
2
Resultant engineered acoustical response of crossover network and components.
3
AES standard, one decade pink noise with 6 dB crest factor within device’s operational band, free air. Standard AES
2 hr rating plug long-term 100 hr rating are specified for low-frequency transducers.
4
IEC standard, full bandwidth pink noise with 6 dB crest factor, 100 hours.
5
Calculated based on power rating and sensitivity, exclusive of power compression.
6
Anechoic sensitivity in free field, no additional sensitivity gains from boundary loading.
High Output Three-Way
Full-Range Loudspeaker
with 2 x 12" LF
Key Features:
 Two high power 300 mm (12 in)
transducers in a compact slot-loaded
configuration for low frequency extension
to 40 Hz.
 High power CMCD™ Cone Midrange
Compression Driver provides high sensi-
tivity and high continuous SPL capability
along with low distortion, extended band-
width and improved phase coherence.
 Large format neodymium HF driver
provides clear intelligible high frequency
projection.
 Large PT™ Progressive Transition™ wave-
guides provide consistent 90° x 50° pat-
tern control, low distortion at high SPL
levels and smooth frequency response.
 Rotatable mid and high frequency wave-
guides allow either horizontal or vertical
cabinet orientation.
 Sophisticated, steep-slope passive mid-
high crossover network with switchable
tri-amp/bi-amp crossover modes.
Applications:
 Performing arts facilities/Live theaters
 Auditoriums/Houses of worship
 Dance clubs/Sports facilities
PD5322/95 is a Precision directivity™
90° by 50° full range, three-way loudspeaker
designed for use in arrays or singly in
demanding music or speech system applica-
tions requiring high output capabiliy with
excellent pattern control and low frequency
extension to 40 Hz.
The low frequency section, two 2206H
300 mm (12 in) VGC™ Vented Gap Cooled
low frequency transducers, offer high power
handling and low power compression for
high continuous SPL capability. A newly
designed LF loading plate provides the high-
est possible sensitivity, low frequency output
and system reliability.
The mid and high frequency sections are
horn-loaded for maximum sensitivity and
pattern control. The CMCD-82H cone
midrange compression driver consists of a
driver/phasing plug assembly providing high
output with low distortion. The design’s
extended response coupled with a small 100
mm (4 in) exit diameter allow for smoother
transition to the high frequency driver in the
magnitude and polar pattern domains. The
integral 200 mm (8 inch) cone driver fea-
tures a high power Differential Drive
®
dual,
voice coil design. The 2431H large format
high frequency compression driver utilizes a
neodymium magnet and aluminum
diaphragm to deliver clear and intelligible
high frequency projection, extended fre-
quency response, and low distortion at even
the highest drive levels.