Install Guide

WALL SURFACE MOUNTING
Note that the
BRACKET ASSEMBLY
consists of an
ARRAY BRACKET
and a
WALL BRACKET
.
1) RUN WIRING
-- Run the wiring from the power amplifier to the location desired for mounting the
JBL PRX ONE Array speaker system.
2)
ATTACH
WALL BRACKET
TO WALL
- Using a level to ensure that the
WALL BRACKET
is
straight, secure the
WALL BRACKET
to the wall. Be sure to use the appropriate wall anchors for
attaching the bracket. Use all four screw holes for maximum integrity and safety. Be sure that the
slot feature is at the top.
Hardware for attaching
WALL BRACKET
to wall not included.
PRX ONE-Install Adapter Bracket Kit Assembly & Bracket Installation Guide – Page 2